Devices Apr Apr. Recirculation dust collectors apr, aprk Overall and connecting dimensions
Recirculating dust collecting units APR, APRK designed for suction and purification of air from dry non-sticking fine abrasive dust during metalworking of products on tool-grinding, grinding and metal-cutting machines.
The dust collecting apparatus consists of a housing, a built-in cyclone element for separating large fractions of dust, a dust collector, a centrifugal fan with profiled blades installed inside the housing, a built-in silencer and a filter stage.
The following can be installed on the dust collector as a filter stage:
- filter bag from imported needle-punched calendered material based on polyester fibers, in this case, the models of the units are designated APR-1200 and APR-1600;
- cassette from filter paper (cellulose) of cleaning class F9 (dust cleaning efficiency ≤ 3 microns - 99%) or a polyester cassette of cleaning class M6 (dust cleaning efficiency ≤ 5 microns - 93%), in this case the unit models are designated APRK-1200 and APRK-1600.
Filter bag machines have a relatively small filter surface and therefore a low dust capacity.
Currently, the production of APR industrial vacuum cleaners with a filter bag is temporarily suspended and only APR devices with a filter cassette are produced.
Due to the developed filtration surface, devices with a cassette have a significantly higher dust capacity, which makes it possible to ensure long-term operation of the device without a significant decrease in productivity. On dust collectors with a filter cassette, the residual dust concentration, as a rule, does not exceed 0.5 mg/m 3 .
Dust collecting units APR are installed in the immediate vicinity of the machines, while providing a suction speed in the suction of up to 22 m/s. Ideal for equipment with a small load factor of 0.1/0.2. Several local suctions can be connected to one device.
An example of the operation of the dust collecting unit APRK-1200 with a metalworking machine at the site of one of our customers is shown in the photo on the left.
Regeneration. APRK devices are manufactured only in the version with manual regeneration (cleaning). To clean (regenerate) the cassette, it is necessary to remove it from the device, clean the inner surface with a soft long-haired brush and thoroughly shake out the cassette, then blow it with compressed air from outside to inside.
Technical characteristics of dust collecting units APR, APRK
| APR-1200 / APR-1200 | APR-1600 / APR-1600 | |
|---|---|---|
| Productivity, m 3 / h | 1200 | 1600 |
| Installed power of electric motor, kW | 1,5 | 3 |
| Voltage, V | 380 | 380 |
| Dust collector volume, m 3 | 0,04 | 0,055 |
| Weight, kg | 75 | 98 |
| Number of suctions, up to pcs. | 1-2 | 1-3 |
| Maximum length of the air duct (hose) from the place of dust collection, m | 6 | 6 |
| Noise level, dBA | 74 | 76 |
| Maximum dust concentration at the inlet, g/m 3 | 5 | 5 |
| Dust removal efficiency, average particle diameter d=30mk, not less than, % | 99,5 | 99,5 |
| Cleaning class APRK with cellulose cassette | F9 | F9 |
| Cleaning class APRC with polyester cassette | M6 | M6 |
| on the APRK unit withcellulose cassette, rub. | 83"000 | 108"700 |
| Current selling price with VAT for 2019 on the APRK unit withpolyester cassette, rub. | 85"600 | 113"300 |
| Production time for any APRK unit: 20-25 working days after payment. | ||
| Selling price with VAT for the APR unit with a bag filter, rub. | temporarily unreleased | temporarily unreleased |
- Fan
- cyclone element
- Cassette for APR or filter bag for APR
- electric motor
- Dust box
- inlet pipe
Overall and connecting dimensions APR, APR
| Model of dust collecting unit | H | B | d | h | L |
|---|---|---|---|---|---|
| APRK-1200 | 2250 | 560 | 160 | 670 | 700 |
| APRK-1600 | 2300 | 710 | 180 | 810 | 755 |
| APR-1200 | 2300 | 560 | 160 | 580 | 700 |
| APR-1600 | 2400 | 710 | 180 | 605 | 755 |
Questionnaire and passport
Apparatus for capturing fine dust APR. APK.
Recirculation dust collecting units APR-1200, APR-1600, APRK-1200, APRK-1600 are designed for suction and air purification from dry non-sticking fine abrasive dust.
The dust collecting apparatus consists of a housing, a built-in cyclone element for separating large fractions of dust, a dust collector, a centrifugal fan with profiled blades installed inside the housing, a built-in silencer and a filter stage.
As a filter stage, the dust collecting apparatus can be equipped with either a filter sleeve made of imported needle-punched calendered material based on polyester fibers (APR-1200, APR-1600) or a cassette made of F 9 filter paper (APRK-1200, APRK-1600). Filter bag machines have a relatively small filter surface and therefore a low dust capacity.
Due to the developed filtration surface, devices with a cassette have a significantly higher dust capacity, which makes it possible to ensure long-term operation of the device without a significant decrease in productivity.
On dust collectors with a filter cassette, the residual dust concentration, as a rule, does not exceed 0.5 mg/m3. The devices are installed in the immediate vicinity of the machines, while providing a suction speed in the suction of up to 22 m/s.
Ideal for equipment with a small load factor of 0.1/0.2. Several local suctions can be connected to one device.
|
Model |
||
|
Productivity, m3/h |
1200 |
1600 |
|
Installed power of electric motor, kW |
||
|
Dust collector volume, m3 |
0,04 |
0,055 |
|
Weight, kg |
||
|
Number of suctions, up to pcs. |
||
|
Noise level, dBA |
||
|
Dust removal efficiency, average particle diameter d=30mk, not less than, % |
99,5 |
99,5 |
|
Fan |
5. Dust box |
|
2.Cyclone element |
6. Inlet pipe |
|
3. Cassette for APR or filter bag for APR |
|
|
4. Electric motor |
|
Model |
H |
B |
d |
h |
L |
|
APRK-1200 |
2200 |
||||
|
APRK-1600 |
2270 |
||||
|
APR-1200 |
2300 |
||||
|
APR-1600 |
2400 |
Attention!
Our company supplies products from several manufacturing plants with a similar range. The manufacturer reserves the right to make changes to the design and model range of the supplied equipment. If necessary, you can ask our managers for more detailed information on a specific model.
Recirculating dust collectors APR, APRK are designed for suction and purification of air from dry non-coalescing fine abrasive dust. The device consists of a housing, a built-in cyclone element for separating large fractions, a dust collector, a centrifugal fan with profiled blades installed inside the housing, a built-in silencer and a filter stage. As a filter stage, either a filter sleeve made of imported needle-punched calendered material based on polyester fibers (APR-1200, APR-1600) or a cassette made of F9 filter paper (APRK-1200, APRK-1600) can be installed on the apparatus.
Filter bag machines have a relatively small filter surface and therefore a low dust capacity. Devices with a cassette with a developed filtration surface have a significantly higher dust capacity, which allows for long-term operation of the device without a significant decrease in performance. On devices with a filter cassette, the residual dust concentration, as a rule, does not exceed 0.5 mg/m³.
The devices are installed in the immediate vicinity of the machines, while providing a suction speed in the suction of up to 22 m/s. Ideal for equipment with a low load factor.
Several local suctions can be connected to one device.
1. Fan
2. Cyclone element
3. Cassette (APRK)
4. Filter bag (APR)
5. Electric motor
6. Dust box
7. Inlet pipe
Specifications
|
Productivity, m3/h |
||
|
Installed power el. Engine, kW |
||
|
Dust collector volume, m3 |
||
|
Number of suctions, pcs. max |
||
|
Noise level, dBA |
||
|
Overall dimensions of the device in the package, mm |
||
|
Overall dimensions of the cassette in the package, mm |
APRK-1200,
APRK-1600
Recirculation dust collectors APRK are designed for suction and purification of air from dry, non-coalescing fine abrasive dust.
The device consists of a housing, a built-in cyclone element for separating large fractions, a dust collector, a centrifugal fan with profiled blades installed inside the housing, a built-in silencer and a filter stage. A cassette is installed on the device as a filter stage. The cassette has a developed filtration surface and, accordingly, a large dust capacity, which allows for long-term operation of the device without a significant decrease in performance. Polyester cassettes have high mechanical strength and, accordingly, a long service life.
The filter cassettes produced by our company have a cleaning class of F7 (fine cleaning) and E10 (high efficiency filters), the residual dust concentration, as a rule, does not exceed 0.5 mg/m³.
The devices are installed in the immediate vicinity of the machines, providing a suction speed of up to 22 m/s. Ideal for equipment with a low load factor.
Air ducts, transitions and collectors for several inputs can be supplied with the devices.
| Model | H | B | d | h | L |
|---|---|---|---|---|---|
| APRK-1200 | 2250 | 560 | 160 | 670 | 700 |
| APRK-1600 | 2300 | 710 | 180 | 810 | 755 |
- Fan
- cyclone element
- Cassette (APRK)
- electric motor
- Dust box
- inlet pipe
| Model | APRK-1200 | APRK-1600 |
|---|---|---|
| Productivity, m 3 /4 | 1200 | 1600 |
| Installed power of electric motor, kW | 1,5 | 3 |
| Dust collector volume, m 3 | 0,04 | 0,055 |
| Weight, kg | 75 | 98 |
| Number of suctions, pcs. max | 2 | 3 |
| Noise level, dBa | 74 | 76 |
| Overall dimensions of the device and cassette in the package, mm | Housing 900x670x1490 Cassette 600x600x1015 | Case 1070x850x1550 Cassette 700x700x1015 |
| Max. dust concentration at the inlet, g/m³ | 5 | 5 |
| Efficiency of dust removal (average particle diameter d = 30 microns), not less than, % | 99,5 | 99,5 |
Description and characteristics
APK APR
Recirculation dust collecting units APR-1600, APR-1600 are designed for suction and purification of air from dry non-coalescing fine abrasive dust. The dust collecting apparatus consists of a housing, a built-in cyclone element for separating large fractions of dust, a dust collector, a centrifugal fan with profiled blades installed inside the housing, a built-in silencer and a filter stage.
As a filter stage, the dust-collecting apparatus can be equipped with either a filter sleeve made of imported needle-punched calendered material based on polyester fibers (APR-1600) or a cassette made of filter paper of cleaning class F 9 (APRK-1600).
Filter bag machines have a relatively small filter surface and therefore a low dust capacity. Due to the developed filtration surface, devices with a cassette have a significantly higher dust capacity, which makes it possible to ensure long-term operation of the device without a significant decrease in productivity.
On dust collectors with a filter cassette, the residual dust concentration, as a rule, does not exceed 0.5 mg/m3. The devices are installed in the immediate vicinity of the machines, while providing a suction speed in the suction of up to 22 m/s. Ideal for equipment with a small load factor of 0.1/0.2. Several local suctions can be connected to one device.
1. Fan
2. Cyclone element
3. Cassette for APR or filter bag for APR
4. Electric motor
5. Dust box
6. Inlet pipe
