Clean laminate: how to wash without streaks at home and how. Sparkling laminate - take care of it right! What rag to wash the laminate at home

It so happened that in different rooms we have different laminate. After several years of operation, I began to notice that with the same care, the laminate floor in one room looks like new, and in the other it is clearly worn out. Obviously, the matter is the quality of the coating. But not only.

What laminate can be washed

If you know how, then you can wash any type of floor covering. But some will withstand only the touch of a well-wrung rag, while others will not even care for a floor steam cleaner.

You should think about care even at the time of buying a laminate, choosing it according to the degree of moisture resistance and the method of installation:

moisture resistance. The higher the class of the laminate, the higher its resistance to moisture, abrasion and other influences. When buying, you need to pay attention to the designations on the packaging. For different manufacturers, they may differ, therefore, in case of doubt, it is better to contact the seller for decoding the icons.

Moisture resistance is most often referred to as three drops or a tap with a drop. As well as the inscription "Aqua Resist" or "Aqua-Protect". As a rule, the price of such coatings is higher. But they can be laid in the kitchen and even in the bathroom.

Laying method. Seam-in-seam or adhesive installation leaves gaps between the panels for water to enter when you mop the floors. The lock connection is much more reliable, especially if the locks are waxed.

Of course, we did not save any packaging, so now we cannot find out the properties of our laminate. We only remember that in one of the rooms they took a very budget option on sale. So he turned out to be very capricious.

In such cases, in order to understand whether it is possible to wash the laminate with water, I can advise you to conduct an experiment. If there is a scrap, moisten it abundantly and look at the changes after some time. If there are no scraps left, wet the floor in an inconspicuous place. For example, under the bed.

If the material swells or deforms, then it cannot be washed, you can only wipe it with a well-wrung cloth. And even more so, you should not use a washing vacuum cleaner or a laminate steam cleaner.

How and with what to wash the laminate?

Even if you are confident in the moisture resistance of your coating and in its high-quality assembly, there are still questions about care. After all, whatever one may say, this material is made from wood, which requires a special approach.

Therefore, it is worth considering whether it is possible to wash the laminate with a steam cleaner or a washing vacuum cleaner, is it possible to use cleaning products and which is better - a rag or a mop?

Let's figure it out. But first, a few words about what should precede wet cleaning.

Before washing...

The laminate top layer protects this flooring from moisture. If it is damaged - scratched or worn - the degree of protection drops.

And not only the legs of chairs or heels can scratch it, but also sand brought in by shoes from the street, dried bread crumbs and other debris. If you do not remove it, but immediately start rubbing the floor with a rag, it will work like sandpaper.

Therefore, whatever you choose for wet cleaning, you must first do dry. The instruction recommends using either an ordinary broom or a vacuum cleaner with a soft brush to remove dust and abrasive particles from the surface.

How to clean laminate - with a rag or mop?

Mop or rag - no difference. The main thing is that there is not much water left on the floor. Therefore, when choosing which cloth is better to wash the laminate or which nozzle to use for the mop, you need to give preference to those materials that absorb water well and wring out. It can be microfiber, and a sponge, and ordinary household fabric.

You can wash it with plain water or add products to it that give the coating a shine. And some also create a protective film on it.

We prepare the solution. The detergent is added to the water in accordance with the instructions. As a rule, the cap plays the role of a measuring cup.
Wet a rag. After wetting, it must be squeezed well.
We wipe. Do not wash with a wet cloth, but wipe with a damp one. This is enough to remove dirt from a smooth surface.

Wash off with clean water. The technology is the same, only we wet the rag in clean water, changing it more often. Here attention: if you used special products for gloss and the formation of a protective film, they cannot be washed off. This is done only when using detergent compositions that leave whitish stains on the floor after drying. Therefore, always carefully read the instructions.

Detergents should be focused on.

Many flooring manufacturers produce related products for them. Including special chemicals, and even tools for care. These include such well-known companies as Egger, Tarkett, Quick-Step, EPI, Parafloor, Alloc, Pergo.

They can be bought in specialized stores, and used for their intended purpose without fear of damaging the coating.

There are commercially available non-branded detergents designed specifically for the care of the laminate. Among them:

Emsal Laminate. Production - Germany. Soap-based liquid that removes fresh and old dirt, makes floors shine and provides temporary protection against dirt.
Mellerud. An effective Swedish product for removing dirt and grease, as well as many other types of dirt.
Mr. Proper. Thanks to advertising, it is known even to those who have never washed floors and are not going to do so. But the tool is really good, suitable for different coatings, does not leave marks at all.

They are also not able to somehow harm the floors, if you strictly follow the recommendations for use. But cheap compounds of unknown origin or other purpose (for example, dishwashing liquids or washing powders) are capable. And if you decide to use them, then first test on an inconspicuous area of \u200b\u200bthe floor.

But it's better not to risk it. If there are no special equipment at hand, you can use ordinary table vinegar instead - one tablespoon per half a bucket of water. Such a solution will wash well and add shine.

Use of special equipment

To answer the question of whether laminate flooring can be washed with a steam mop or steam cleaner, you need to know everything about the quality of the coating. If it is not moisture resistant and laid without sealing the joints - definitely not.

But even the highest quality waxed-lock laminate flooring must be cleaned with a few precautions. Because hot steam supplied under pressure can harm him too. I would recommend listening to the following tips:

Use an old terry towel folded in half instead of the tissue that came with the steam cleaner;
Do not supply steam continuously. And if it is possible to adjust the feed power, choose the minimum;
Try not to use steam generators too often.

If there is a choice: a washing vacuum cleaner or a steam cleaner, then it is better to give preference to a vacuum cleaner. But only one that has good suction power and immediately removes the splashed liquid, preventing it from affecting the surface.

In the instructions for such devices, manufacturers usually indicate the scope. In case of doubt, again, I can advise you to conduct your own test on a separate panel or in an inconspicuous place.

By the way, my cheap laminate began to lose its appearance just after buying a Karcher steam cleaner. And he did not harm the coating in another room at all.

So again we return to the fact that the cleaning method must be chosen taking into account the type and quality of the laminate.

How to remove stains?

Washing the floor from ordinary household dirt is easy. But what to do if stains are found, what cleaning products can be used? It depends on the type of pollution:

Marker, felt-tip pen, nail polish marks can be removed with acetone, mineral spirits, or alcohol-based window cleaner. The product is applied to the stain with a swab and immediately washed with a soft, light-colored cloth.

Black marks from shoes can be erased with a school eraser or washed with a solution of baking soda.
Hardened wax, grease or chewing gum is carefully scraped off with a spatula. Before that, you can put a bag of ice on them. If during the cleaning process it was not possible to do without scratches, they should be covered with a special putty or wax for parquet, matched to the tone.

Blood stains are also best removed with a window cleaner spray. After spraying, blood stains should be wiped off with a soft cloth.

But what is better not to use in such cases is ammonia-containing compounds. They may be able to cope with stains, but they will also dissolve the protective film.

Well, and most importantly: if you spilled something on the floor, whether it be water, tea, juice, wine or other liquid, it must be wiped up immediately before it penetrates into the joints.

Conclusion

As you can see, there is nothing complicated in caring for laminate flooring. You just need to take into account its features and try not to wet the coating much if it is not moisture resistant. It is best to use a rag or mop and special tools. And if the floor material is wear-resistant and laid in a locking way, then special equipment can also be connected to cleaning.

More about all this - in the video in this article. And if you disagree with something or have questions, welcome to the comments or to the forum.

Laminate is a fairly economical flooring that is also easy to install. At first glance, it is sometimes indistinguishable from real wooden boards, tiles or even stone. But you need to take care of such a coating carefully and carefully. Laminate flooring requires constant attention and does not tolerate rough handling.

Features of the laminated coating

Laminate flooring is boards that are connected to each other with a “lock”. Together, as a rule, they form a flat surface without tangible joints.

There are two types: household (grades 21-23) and commercial (grades 32-33). The first is usually laid at home, and the second - more durable - in offices, for example.

On the packaging you can also sometimes see the marking "degree of wear resistance". There are three of them: minimal (AC1, AC2), medium (AC3, AC4), high (AC5).

There is also a moisture resistance marking:

DPL - non-moisture resistant;
DPR - more moisture resistant, wet cleaning once a week is acceptable;
HPL - with increased strength. Cleaning with water is allowed once every 5 days;
CPL is a floor covering with high moisture resistance. Use of the washing vacuum cleaner is possible.

The name "laminate" is translated from Latin as "layered". And this is no coincidence, since the canvases themselves consist of four layers:

Yes, in general, a fairly strong product is formed, but it still has weaknesses. Care for him must be careful and constant.

How to properly clean a laminate floor?

Start with dry cleaning. This is especially true of the lower class laminate. Take any tool: a broom, a dry mop or soft cloth, a vacuum cleaner with a soft nozzle. Try to guide the selected device along the boards so that dust and fine dirt do not get between them. Always move from the far corners to the exit. In general, there are almost no restrictions for dry cleaning. And it is best to do it daily to avoid strong, ingrained dirt and scratches from small debris.

If necessary, do wet cleaning. But try not to wash your laminate floor more than once every one and a half to two weeks. Boards of a higher class are allowed to be washed more often - once a week. You need to start by choosing a tool. The requirements for it are the same as for dry cleaning - avoid rough materials and unnecessary elements that can leave scratches. A microfiber mop works great. In addition to the fact that this material is quite soft, it washes well and absorbs water well. If there is no such material at hand, then you can take wool, soft cotton or synthetics. Keep in mind that you need a slightly damp cloth for cleaning.

Advice! Worst of all, a mop with a rope rag absorbs moisture - it can greatly ruin the canvas.

Next, you need to choose cleaning agent. Although it is still better not to use household chemicals, but to wash only with hot water (but not boiling water!) - so the effect on the protective layer of the canvas will be much softer. In addition, ordinary water does not leave streaks. If there is a need to refresh or wipe off dirt, choose a product specifically for this coating. When in doubt about the safety of a certain cleaning agent, it is best to test it on a small, inconspicuous area before cleaning the entire floor.

Advice! After wet cleaning, it is advisable to walk with a dry cloth so as not to leave moisture on the floor.

How to wash laminate from difficult stains?

What can't be used?

So, the first rule is that a floor made of such material should not be washed with a large amount of water. But there are other things to avoid when cleaning:

aggressive substances. For example, containing chlorine. This component can eat away the pattern and color, spoil the wooden canvas as a whole.
Solvents. Acetone helps in the fight against stains, but you should not get carried away with it. This liquid quickly dissolves the protective layer.
Powders. Small granules and lumps easily scratch the protective coating of the board. It is best to avoid them when cleaning.
Hard old rags, sponges with abrasive elements are also capable of causing mechanical damage.
Acids and alkali. These substances in cleaning products corrode the top layer, it becomes unnaturally matte.
Wax, mastic, silicone. These things are used to give shine to the flooring. But it's best to leave this job to a professional.

Laminate cleaners

There are a huge number of products on the market of household chemicals created specifically for this type of floor. But not only: inventive housewives, on their own experience, also helped to compile the following list of improvised means.

Folk

Professional

Even with regular gentle cleaning, maximum cleanliness cannot be achieved. Once every 3-4 weeks, a more thorough washing is still required. And then professional tools come in handy. They are specially designed for laminate flooring and therefore perfectly cope with the dirt on it, without leaving damage and streaks. Often they also have nice bonuses: for example, the after-wash product protects the coating after washing or softens the water. Many of them are sold in hardware stores, some will have to be searched in online stores:

"Bugs Laminate". Relatively inexpensive Russian-made product. Contains linseed oil. Also suitable for daily cleaning.
Laminol. Also a domestic product. When you need to wash the laminate without streaks - this is Laminol. It has several more advantages: it does not require rinsing, softens hard water, contains orange oil.
"HG". Dutch production. In its usual form, it can be used as a stain remover, and if diluted with water, you can wash the entire floor. Also, after washing, "HG" leaves a protective film and a pleasant aroma.
Emsal Laminate. German production. Good for any kind of dirt: glue, grease, wax and paint stains. Also covers the floor with a thin film.
"Mellerud". Produced in Switzerland. Considered one of the best in the world.
"Unicum". After washing with this substance, there are also no streaks left, a shine appears. It also kills bacteria and has a pleasant aroma.
Starwax. Emulsion of the French manufacturer. Washes the laminate well from dirt, but does not leave a shine. It doesn't need to be washed off. The hostesses who used it recommend diluting twice as much water as indicated in the instructions. Perhaps the product is more suitable for washing rooms where they walk in street shoes.
Denkmit. The peculiarity of this product is that after washing the floor, a wax film remains, which does not allow moisture to pass through.
Mr Proper. You can call it universal. Quickly cleans dirt from various floor surfaces. Rinses off easily and smells good.

This cleaning tool has both pros and cons. Consider all the advantages and possible risks.

High cleaning speed.
High quality floor cleaning.
Various nozzles and modes.

steam generator

There is a lot of controversy around the steam generator with respect to laminate, but most housewives will still agree that this tool is dangerous for such a coating. Hot steam is the worst thing you can think of for a laminate floor, as it it can destroy even the most wear-resistant.

Instead of a steam generator, you can use an alternative tool - a steam mop. It is not so aggressive on the laminate flooring. But you need to use it very carefully: steam can get into the joints.

How to make laminate shine?

To make the laminate shine, mix 1.5 tbsp. vinegar, 1 tbsp. lemon juice and 2 tbsp. warm water. Then add a few drops of dishwashing liquid. Use the resulting mixture to polish the laminate. Don't rinse. Open windows.

There is another option for making the laminate shine. For 5 liters of water you need 2.5 tbsp. l. gel (low PH) and 1 tbsp. l vinegar. Treat the floor surface with open windows, do not rinse.

How to fix scratches?

Minor scratches and abrasions on the laminate can be hidden with a flannel cloth soaked in vegetable oil. For the same purposes, an ordinary eraser is suitable. There is also a special wax pencil and polish.

But in order to restore the surface, mask deep dents and chips, you will need a special paste and putty. They must be applied to the damaged area and left for 24 hours. After a day, the place can be sanded and varnished.

Try to stick to the "golden mean" when washing the floor: not often and not infrequently, so as not to spoil it with constant moisture or stagnant dirt.
Do not walk on laminate flooring in heels. It is better to wear soft indoor shoes or even go barefoot.
Put pads on furniture legs to prevent scratching the floor.
If liquid gets on the laminate, try to dry the area immediately with a dry, clean cloth.
If scratches, dents, chips appear, eliminate them immediately, otherwise the complete destruction of the canvases will not be avoided.
If severe contamination is found, remove it immediately. Dirt is quickly absorbed deep into the laminate and then nothing is removed.

The question of how to wash the laminate at home arises for every practical home owner who wants to maximize the life of a beautiful floor covering. With improper care, it loses its luster, deteriorates from moisture, and ugly traces of poor-quality cleaning become visible on the surface.

How to properly clean laminate flooring?

Thinking about solving the problem than washing, practical owners strive ahead of time to purchase the best fixtures and appliances for caring for the floor. The decorative coating has a glossy film that is easy to clean from dirt with even the simplest equipment, but a person always strives to find the best household equipment for the home. To make it easier to decide on how to wash laminate floors, you need to divide the types of cleaning into categories.

The main devices for different types of cleaning laminate:

Dry cleaning - the simplest broom or a convenient brand of vacuum cleaner with a brush equipped with soft bristles.
Wet cleaning - floaters with washing nozzles or modern mops with a wringer are used.
The final stage of cleaning - wiping the surface dry is carried out with flannel rags or a microfiber cloth.

When considering the topic of whether it is possible to wash the laminate with a washing vacuum cleaner, you should always consider the type of yours and the technology of its production. Budget floors made using the caching method and DPL lamellas can only be cleaned with a dry method. Coating brand CPL, DPR, HPL has moisture-repellent characteristics and it is allowed to use wet cleaning methods. To solve the problem of how to wash the laminate, you should purchase powerful appliances that do not leave a lot of moisture on the floor.

Which washing vacuum cleaner is suitable for cleaning laminate:

The principle of operation of these devices is to influence the pollution with hot steam, which helps to soften and dissolve most of the unpleasant deposits. When choosing which mop is best to wash the laminate, you need to consider the method of laying the flooring. Most manufacturers recommend using steam appliances exclusively for working with adhesive-backed floors.

They are more versatile devices than mops, but the principle of their work is almost identical. These devices can be used both for cleaning the floor and other household items. To solve the problem of how to wash the laminate at home, steam cleaners are well suited, but they are recommended to be used mainly for the care of waterproof coating brands. It is advisable to set the device to the middle position, carry out periodic steam supply and fold the floor cloth for nozzles in half.

Previously, cotton cloth was used to clean the floor, later rags made of polyamide, acrylic, and viscose became widespread. Thinking about how you can wash the laminate at home, you should consider purchasing a canvas from the most modern and innovative material - microfiber. Superfine fibers of this material perfectly absorb moisture and various pollution.

The main advantages of microfiber:

Excellent hygroscopicity.
The fabric does not lose its attractive color for a long time.
Microfiber in the process of washing does not leave villi on the floor.

Cons of microfiber:

What is the best way to clean laminate flooring?

To facilitate the cleaning of the flooring, manufacturers now produce a lot of all kinds of tools. When it comes to cleaning laminate flooring, it is better to give preference to well-known brands, to purchase liquids and gels, which, in addition to the cleaning effect, have additional protective properties. On average, for work it is required to dissolve up to 3-4 caps of concentrate per 5 liters of water.

Popular brands of laminate care products:

Denkmit;
Mr. Proper;
Emsal Laminate;
Starwax;
Unicum "Laminate".

When purchasing special detergents, substances hazardous to the laminated surface should be excluded from your list. For example, the floor can become covered with unpleasant spots when using a chlorine-based liquid. In fact, than washing laminate at home, beware of using solvents, acetone and varnish removers that can damage the delicate structure. Scouring abrasive powders are an undesirable choice, they can scratch the surface of the floor.

Can laminate flooring be washed with water?

It is not recommended to pour a laminate floor in any case, even a waterproof coating can let moisture into the interlock, which will lead to undesirable consequences. If you do not have a special tool in the house, but you need to urgently clean, then clean water for wetting a rag is perfect. It is better to wash the laminate at home with a not too damp cloth, squeezing the canvas well before use.

In cases where the laminate is relatively clean and you need to collect crumbs, animal hair and fine dust from the surface, a sponge brush is best for cleaning instead of a damp cloth. After wet cleaning with a washing vacuum cleaner or steam generator, always try to wipe the floors dry without leaving wet areas to prevent moisture droplets from getting inside the seams.

The question of whether it is possible to wash laminate flooring with bleach is of concern, first of all, to pet owners. There are many other reasons that require regular disinfection of the floor surface in the house to eliminate the appearance of pathogens. Preparations "Whiteness", Domestos, Chirton, SANFOR UNIVERSAL or their analogues, it is desirable not to use for cleaning the laminate. Reviews of many people talk about the adverse effects of active chlorine on the decorative coating. Try to choose products with a safe composition or use gentle folk methods.

Washing Laminate with Vinegar

Going through different options, the better to wash the laminate, people always try to use affordable household preparations that are available in the home kitchen for this purpose. Vinegar is a popular and environmentally friendly product that has been used for centuries to cook a variety of dishes or disinfect. If we wash the laminate with water, then it is allowed to add a little of this liquid with a sour taste to a bucket in a safe concentration.

How to clean laminate flooring with vinegar:

We dilute our product in the proportion of 60 ml of vinegar per 1 liter of water.
Pour the solution into a spray bottle and shake well.
For the best effect, you can add up to 3 tablespoons of dishwashing gel (without chlorine) to the water with vinegar.
It is advisable to cover a small area of the floor with a working solution and immediately start cleaning so that the vinegar does not have time to destroy the laminated layer.
After treatment, wipe the floor with a damp cloth.
The rag should be well wrung out during washing.
The final stage is to wipe the laminate dry with a clean cloth.

Can you clean laminate flooring with hydrogen peroxide?

In search of a solution to the problem of how to wash the laminate, many often look to the home first aid kit, where you can always find hydrogen peroxide - a liquid with excellent redox and disinfectant properties. This is a strong drug that should be used with caution. There are many nuances in the question of whether it is possible to wash laminate floors with peroxide. It is advisable to apply this solution on a local area in case of extremely difficult stains, for example, from blood.

To accomplish the task of how to wash a laminate without streaks, the main condition is the use of crystal clear water. If cloudy, immediately change the liquid in the bucket, after cleaning a small area of the floor, try to rinse the rag. It is advisable to remove the coating along the laid lamellae and along the decorative pattern, then the small remaining traces will merge with the pattern. We finish washing the laminate always by wiping the surface dry with a clean cloth.

How to remove difficult stains from laminate:

Trying to learn a solution to the problem of how to properly wash laminate floors, practical housewives try not only to get rid of dirt, but also to give their flooring a presentable shiny look. Always try to brush or vacuum crumbs and dust from the flooring well at the beginning of cleaning so that they do not soften and smear on it during wet cleaning. To add shine, a light vinegar solution or special laminate care products are suitable - Emsal Laminate, Mr. Proper, Lobacare Laminat Cleaner, TRI-BIO concentrate, Bagi "Mastic".

How often can laminate flooring be cleaned?

The question of how often the laminate is washed has always worried careful owners who seek to maximize the life of a delicate and beautiful coating. Without undesirable consequences, semi-commercial material classes (32 and above) and special waterproof grades withstand contact with water; budget floors often suffer at joints with frequent wet cleaning. In any case, try to replace washing the slats with dry types of cleaning, more often using a broom, a soft brush or a vacuum cleaner. Wipe always with a wrung-out cloth, completely removing moisture from the surface of the laminate.

As already mentioned, laminate flooring is only partly made of wood, so it is much easier to care for it than a floor made entirely of natural wood. However, it still needs to be removed. So how to wash a laminate without streaks, efficiently and quickly?

If it is not properly cleaned such a floor, then over time, it will fade and the surface will look unattractive. Therefore, it is very important to know how to properly clean laminate flooring.

It is very important to know how to properly clean laminate flooring.

Before you start cleaning, you need to go to a hardware store and get everything you might need. In order to collect large and small debris, you will need a soft-bristled broom or a vacuum cleaner with a special nozzle with bristles. For wet cleaning, you will need a mop with a sponge, a bucket of water and special detergents suitable for cleaning laminate. Please note that the mop should have a soft cloth or non-abrasive sponge.

Every housewife wants to know how to wash a laminate without streaks. It is necessary to follow the correct sequence of actions. For easier cleaning, the floor must first be vacuumed or swept with a broom. It is important that the vacuum cleaner has a bristle attachment to avoid scratching the laminate. Carefully clean all corners in the rooms, as this is where the main accumulation of dust occurs.

Next, you should proceed to wet cleaning the floors. The detergent that you picked up in the store must first be tried on a small area, preferably in less visually accessible places. If nothing happened to him, the flooring has not lost its luster and at the same time it has become clean, then feel free to wash the entire floor with this product.

Test the product on a small area of the laminate

Follow the instructions on the package. Some products need to be rinsed off, while others do not require additional mopping. If foam forms when diluting the product in water, then be sure to wipe the floor again. Otherwise, after drying, whitish stains will be visible on the laminate. And you will again wonder - how to wash the laminate so that there are no traces at home.

To achieve clean floors faster, you need to change the water frequently and wring the cloth well. And of course, the key to success is regular wet cleaning.

Of course, every housewife wants to know how to wash the laminate so that there are no streaks. Looking into the department with cleaning products, eyes run wide. It's very hard to decide what to choose. Since such flooring has become very popular in recent years, laminate flooring products can be found in every store. At the same time, it is important that it is not only effective, but also safe for health. Usually, with this combination, the price is quite high.

Folk remedies for laminate

An alternative option is a streak-free laminate cleaner that has been proven over the years - a 3-9% solution of white vinegar. It must be added to the bucket in which you rinse the rag. Comparing the price of vinegar and safe detergents is just silly. Therefore, if you are wondering how to wash the laminate so that it shines at home, then this is the surest remedy.

The best folk remedy for cleaning laminate - vinegar

Choosing household chemicals

If you still want to use special chemistry for such surfaces, then when buying, it is important to pay attention to the composition. So that the floor does not lose its luster, the product should not contain soap or ammonia. Laminate flooring, unlike parquet, does not require polishing and rubbing. But in places of the most intense load, scratches and scuffs can often form. Specialized pastes will help get rid of them, which you just need to match the color of your floor and apply to problem areas.

How not to leave white spots with water?

A very important question is whether it is possible to wash the laminate with water. After all, tap water itself is slightly alkaline. When cleaning floors, it can leave white spots. In order to avoid this, you need to carefully wring out the rag so that the water from the surface of the floors dries in a minimum amount. If the liquid still remains on the surface, then you need to take a dry cloth or rag and wipe the floors dry. Indeed, in addition to the appearance of stains, the laminate floor can simply be damaged by a large amount of moisture.

After wet cleaning, do not walk on washed surfaces. Let the entire area dry out. It would also be ideal to open the windows and ventilate the room.

How to remove stains from laminate flooring

It is very important to know how to wash the laminate so that there are no traces of stains at home. In this case, it is necessary to understand what kind of spot we are dealing with.

Ink

If we are talking about ink stains, then first try to remove it with ordinary water and a rag. If that doesn't help, then add a laminate cleaner. If the stain is so deeply ingrained that even this did not save, then you will need to buy a stain remover specifically for ink stains.

Marker

The marker can be removed from the floor with a white spirit solution applied to a piece of soft cloth.

Blood

If there are blood stains on the flooring, they can be removed by spraying with a regular glass spray. After the stain disappears, be sure to wipe the area with a damp cloth.

Blood stains are easily removed with glass spray

Wine and alcohol stains can be removed with denatured alcohol
Shoe stains are easily erased with a regular eraser.

Wine

If you spilled any alcoholic beverage on the flooring, then in this case you must use denatured alcohol. Soak a small cloth in it and wipe the floor with it in the right place.

black stripes from shoes

At the entrance to the corridor, characteristic black stripes from shoes often appear. They are easy to remove if you use a regular stationery eraser. If you don’t have it on hand, then such strips can be easily removed by wiping them with a solution of baking soda. In general, most stains can be removed with a conventional glass cleaner.

After the repair is over, the owners still have a hard job of cleaning the house. Paint, glue, grout and more often need to be cleaned off floors after cosmetic work is completed. This is a very laborious work that is absolutely impossible to do the first time. Among other things, it is very important to do this so as not to damage the coating.

It is necessary to clean up in stages. Of course, it’s better to start by picking up large debris with a broom. Mounting foam and paint are removed only with the help of special tools that are sold in large repair and construction hypermarkets. They must contain ethyl alcohol or acetone. Spots must be removed very carefully. The solution is applied literally for one minute and after that it must be wiped very quickly with a damp cloth. Carefully follow the instructions on the detergent package, otherwise you risk damaging the shiny finish.

Chips in the laminate can be repaired with wax crayons

If during the repair process the floor is slightly scratched, then this can be corrected with a special wax pencil. It will fill the place of defects and they will become less noticeable. After you have got rid of the main contaminants, you can start mopping the floor. This is where you will need patience. After all, you will have to do this several times until you completely get rid of the whitish stains left after the repair.

A washing vacuum cleaner is certainly a very convenient invention of mankind, which makes life easier for housewives. But is it suitable for laminate flooring? The answer is obvious if you remember how such a floor reacts to interaction with moisture. Under its long influence, it is able to collapse, especially if the thickness of the laminate is not more than 6 mm.

The principle of washing with a vacuum cleaner is that first the detergent is sprayed, and then it is sucked together with the dirt into the vacuum cleaner. That is, moisture remains on the surface for some time. This can damage the lamination, so it is better to refuse such cleaning.

Excessive moisture from the vacuum cleaner can ruin the laminate

However, there are some modern models of washing vacuum cleaners that can be used for wet cleaning. They usually spray less detergent and have a special nozzle that leaves the surface almost dry. The suction power of such models is also higher than that of the previous generation of vacuum cleaners.

The principle of operation of a steam cleaner is that it removes dirt from the surface of the floor with the help of steam. In fact, steam is water, which also penetrates between the joints and violates the integrity of the surface.

The steam cleaner can only clean the laminate that has been bonded with glue.

Cleaning laminate flooring with a steam cleaner

In this case, you can not worry about the safety of the coating.

How to wash the laminate so that there is no dust

Places in the house, such as the kitchen or hallway, need daily wet cleaning. But in all other rooms it is usually enough to wash the floor no more than a couple of times a week. But the very next day after cleaning, the owners of the laminated flooring may notice that dust has settled on it. This will be best seen on dark-colored surfaces. Therefore, every housewife wants to know how to wash the laminate at home so that it stays clean as long as possible.

Manufacturers of household chemicals do not stand still and invent specialized products for this - antistatic agents for floors. Of course, they will not get rid of dust completely, but they will give at least a minimal effect.

Robotic vacuum cleaners are also becoming more and more popular. You can program them for daily cleaning when, for example, you are not at home. This is a sure remedy for dust on the floor. True, you then have to regularly unload the dust from the robot. But this, you see, is much easier than self-cleaning the floor every day.

So, we hope that you have no questions left about how to wash the laminate so that it shines at home. The main thing to remember is that regular weekly cleaning is the key to success.

Laminate is a comfortable and practical flooring. But in order for it to please the eye for a long time, it is necessary to properly care for the surface. To do this, we will tell you what products can be used when cleaning, how to wash the laminate, and what is better to refuse.

How to clean laminate without streaks?

Laminate is a capricious coating, it cannot be washed with aggressive preparations, stains are visible on it, stains from some substances are almost impossible to remove. But it is possible to deal with all problems if you know what and how.

If traces and stains regularly remain after washing, proceed as follows:

At the first stage, carry out dry cleaning. For this, a vacuum cleaner with a special soft nozzle or a brush with soft bristles is suitable;
Next up is wet cleaning. Today, the store sells a lot of products, they all promise great results. But it's better to use warm water and vinegar, it's eco-friendly and cheap. You will need to dilute 9% vinegar (50 ml) in hot but not boiled water (1 liter). Vinegar neutralizes alkali, which leaves stains on a smooth surface. Interestingly, after that there is no need to wipe dry, everything dries itself instantly. From tools for wet processing, take a rope mop or floater with a mop;
If you washed without vinegar, the remaining moisture must be wiped dry. This requires a separate cloth.

And one more piece of advice: so that there are no traces left, the water must be changed as soon as it becomes cloudy in the bucket. Rinse the cloth under a clean stream.

What special tools can be used?

It is enough to take preparations for washing floors once a week or if the floor is heavily soiled. What does the market offer today?

Pronto- a separate view from the entire line, for wooden floors. Produced in the Netherlands, promises to add shine and extend the life. The average price is 250 rubles;
Emsal- German remedy, made on the basis of soap and linseed oil. According to the manufacturer, it helps to remove dirt, provide protection from dust and moisture. The price is about 270 rubles;
Mellerud Bio- Produced in Germany. Contains various surfactants and fragrances. Helps to care for the floor, keep it clean. It costs about 500 rubles per 1 liter;
HG- suitable for removing heavy dirt, grease stains, stains. The average price is 300 rubles.

The listed liquids and gels are quite expensive, but one bottle will last for a long time, given that you will have to dilute about 3-4 caps per 5 liters of water. There are, of course, cheaper ones, such as the well-known Mr. Proper.

How to clean laminate stains?

Remove caustic stain from laminate flooring need as soon as possible. In doing so, use the following guidelines:

Keep a small bottle of solvent at home, mineral spirits or acetone will work. With their help, you can remove paints of different origin. Soak a cloth in the solvent, remove the stain and wash the floor with water;
If you need to remove the putty, carefully scrape it off with a plastic scraper and wash it with water;
Wine - technical alcohol;
If the child painted the floor with pencils or markers, take white spirit;
The blood is removed with a cloth soaked in window cleaner;
Alcohol will help against brilliant green;
The chewing gum has dried up - freeze it with a piece of ice and scrape it off. Treat the remaining trace with white spirit;
Shoe marks are a common problem, but getting rid of black stripes is easy, just rub them with an eraser.

After any aggressive treatment, wipe the floor with clean warm water and be sure to dry it with a dry cloth.

In no case do not leave the cover wet, laminate does not tolerate moisture well.

What should be discarded when washing the floor with such a coating?

Do not forget to carefully study the list indicated below, in it we will give substances, which cannot be processed wooden surfaces:

Powders intended for cleaning sinks and other sanitary ware. After using them, the laminate will be covered with small scratches and lose its luster;
Alkaline solutions, including soap. They leave stains, blur the protective layer;
Bleachers - they corrode wood;
Hard, metal brushes, rough sponges;
Vacuum cleaner with nozzle for dry cleaning.

In general, it all depends on the quality of the laminate, you can recognize it by marking:

21-22 - designed for about 4 years, quickly wiped off, but the most budgetary;
23 - designed for 6 years. Better resistance to wear;
31 - more expensive, able to last about 10 years;
32-33 - well protected from external influences, moisture resistant. Service life - 15-20 years, but the price is appropriate;
34 - the most durable.

Recently, classes 21, 22 and 23 have been removed from production, as they have shown poor practicality.

How to clean mounting foam from laminate flooring?

When working with foam, it is difficult to avoid splashing it, and even if you cover all surfaces, it sometimes gets on the floor, including.

Below we list how to remove fresh or dried foam:

If the foam is still wet, it's a good idea to have Penosil Foam Cleaner or Oppa on hand. First, remove what happens with a spatula, and remove the remaining stains with a sponge moistened with a cleaner;
For dried foam, buy Penosil Premium Cured and proceed in the same way as the previous situation;
There is an option to cut off part of the foam with a knife, put a damp rag on the remains. This must be done carefully without damaging the coating. Sometimes, having soaked, pollution quickly departs;
Surprisingly, the pharmacy remedy "Dimexide" is considered one of the main enemies of polyurethane foam. Remove the excess with a knife, pour Dimexide on the remains and wipe with a rag. But be careful, the drug can burn your hands, work with gloves.

If the stain is old, it will not be possible to remove it immediately. Try to process, for example, Dimexide several times. But don't forget to rinse it off and dry it afterwards.

If you have a laminate floor, don't wait for it to stain, it's better delete immediately. Everything you need should be at hand to clean the laminate as quickly and efficiently as possible. Do not spare money, stock up on funds in advance.

Video tutorial: remove gum and wax

In this video, Valentina Sholokhova will tell you how to get rid of wax or chewing gum stains on a laminate: