How to artificially age a tree with your own hands - a master class with photos and videos. Do-it-yourself tool for artificial aging of wood Do-it-yourself artificial aging of wood

Due to the fact that wood has been used for the construction and decoration of housing almost from the very beginning of time, today there are many different, at first glance, even strange and illogical methods of wood processing. Different treatment methods have different goals: in one case, you need to protect the wood from decay, in the other, to make it more fireproof, just change the color or give it a more expressive shade.

Important Points

Recently, such a type of processing as wood aging has become increasingly widespread. Artificially aging a tree is quite simple, and this is usually done solely for a decorative purpose, because after aging the wood of the interior or exterior, the house or furniture made from it looks like antique, old and worn by time. In the eyes of connoisseurs and aesthetes, the aging of wood gives buildings and finishes more value.

A sample of furniture using the technique of "aging" wood.

Several more or less simple techniques are known for artificial aging. They can be made independently, having a basic set of tools and substances for wood finishing.

Materials and tools that come in handy to age a tree with your own hands: a brush with metal bristles (or circular), sanding skins, antiseptic and solvent, as well as dark and white glaze, sponge or foam rubber.

Painting after removing soft fibers

This is one of the easiest do-it-yourself wood aging methods, which consists in first treating the required surface with a metal brush. Wood has a structure that is unevenly processed, because in winter, spring, summer and autumn, when the corresponding annual rings are formed in the pillars of wood, its plant vessels develop unevenly.

A metal brush thus removes soft fibers, while harder ones remain, since they are more resistant to mechanical stress. This causes a change in the relief surface of the wood, which is emphasized by further painting.

One of the wood aging techniques is called throwing.

Before making the processing of a wooden surface with a metal brush, they first pass through it with a sandpaper. Only after sanding is brushing performed.

Instead of a regular metal brush, you can also take a circular one, which will require a special nozzle from a grinder. It is important to remember that wood brushing is carried out along the fibers, so they are easier to remove.

The formation of wood dust during the processing of wood is inevitable, so it must be removed with a special brush or brush, observing safety so as not to injure the hand and not bring a splinter under the skin.

After that, the wood is coated with two layers of glaze. A translucent dark composition is applied to the surface, and then removed by soaking with a sponge. After that, the surface can be varnished, left in this form, or treated with a light translucent glaze and also wetted with a sponge.
In the second case, a pattern is created in the “a la Provence” style, which is often used for ceilings and floor beams, for example, in basements or attics, thus creating an atmosphere of antiquity.

Multi-layer processing

In order to give the wood an even more antique look in the interior and at the same time look like it has already been worn out enough, multi-layer painting is best suited for aging.

Even before the wood is painted, they try to make the surface as embossed as possible, damaging it with various tools, for example, self-tapping screws, hammers, and saws. This creates the effect of high wear of wood.

Already with a relief, the wood surface is covered with a layer of ground paint until it dries completely. When it dries, a sufficiently thick layer of dye is applied on top, which can be used as tinting paint or antiseptic color compounds, which gives the wood even more protection.

It is better to use more liquid compositions for applying paint, which spread well and provide an even layer. After the paint has dried, the second stage of mechanical aging is carried out with the help of tools.

At the second stage, the damage must be applied carefully so that they are small. This damage layer is also covered with a white translucent glaze, which, unlike the primer, can be unevenly layered to create the desired embossed effect.

Lacquer gives an aged surface an even more noble look.

Further, after drying, the top layer of white glaze is completely torn off with a metal brush. This allows you to give the wood a relief look with a fairly contrasting color pattern.
The quality of the aged surface depends on how well the white glaze has been diluted. It is recommended to mix it with white spirit in a ratio of 1 to 1 before aging the tree.

Other Methods

The fastest way to age a tree at home, without much effort, is to age the tree with a brush and one type of glaze. First of all, a metal brush is used again, with which in the longitudinal direction it is necessary to scrape the grooves on the surface.

White glazing gives this surface an antique look. Surface finishing is carried out with a brush.
With this method, it is possible to obtain a bleached wood surface, for which the effect of aging is provided by processing with a stiff brush.

Video: wood aging master class

This is tracing paper already from Italian - patina. In a broad sense, patina is the noble traces of aging. The essence of the method: we select the paint to match the furniture, cover it in one layer and let it dry (sand the surface before painting). Then we make the shade lighter - repeat the procedure. Now we take a fine skin or a hard sponge and sculpt the scuffs. It is important that the base is visible through the top layer. It must be seen that the furniture was painted more than once. Adjust the degree of wear to your liking. At the end, cover the product with clear varnish or wax.

Patination is suitable not only for wooden surfaces, but also for metal and plaster, for example. Keep this in mind when choosing paint. They differ just in the type of material on which you will use them. The most popular are acrylic.

Passionate about the process? In addition to furniture, anything can be patinated - from sockets and baseboards to photo frames. And by the way, to start with, it’s better to practice on the latter, and not on the closet.

InMyRoom Tip: sand the first coat lightly to improve its adhesion to the new paint.

How to age a tree at home? This wood finishing technique is popular among gardeners, designers and self-taught craftsmen. With its help, you can make a unique interior and exterior design.

This article is intended for persons over 18 years of age.

Are you over 18 already?

How to age a tree: the main points

To add age to a tree with your own hands, you need to be able to work with natural materials and stock up on tools. Of the tools you need to have:

• metal brush;
• electric or manual planer;
• sandpaper;
• grinder.

In addition to the listed tools, you must also have dust protection equipment. It can be a respirator or goggles. Since there will be a lot of dust in the process of creating crafts, you should think about ventilation methods. It is advisable to carry out this work outdoors. If this is not possible, then the tree is recommended to be slightly moistened before abrasive processing. But before opening with varnish, it must be dried. Also, do not forget that it is absolutely impossible to sweep the dust formed from the surface with your hands in order to prevent the appearance of splinters. Hands also should not touch the surface in order to feel its relief. This can be done only after the complete removal of dust.

In the interior, this technology is used very often. It successfully combines with stone, metal and ceramics. Without it, Provence interior style is unthinkable. But then special painting of the boards is required.

Aged wood is used inside the house for steps, benches, as well as to create a designer lamp or chest of drawers. It can be used to make furniture, such as a table or chairs. It also makes unique boxes. There are many ways to use an old tree in the interior, the choice depends on the design style and aesthetic tastes of the owner.

An artificially aged tree should resemble as much as possible a natural one, which has been influenced by sunlight, wind, rain and other natural phenomena. Therefore, only hand tools and manual processing of the material should be used here, if possible. It is also important to choose the right varnishes and paints for the exterior coating. Today there is a huge range of those, so it is important to make the right choice depending on the desired result.

In order to achieve the effect of antiquity at home, it is first recommended to practice on a piece of wood. This will allow you to evaluate the result and avoid mistakes. For training, you need to take the type of wood from which the entire structure will be made in the future.

To make a beautiful and durable wooden structure with the effect of antiquity, it is important to choose the right type of wood. Coniferous trees are not suitable for this idea, as they contain resin, which interferes with the creation of the effect. It is also worth abandoning birch, cherry, maple, pear, juniper. It is better to pay attention to ash, larch, oak, wenge, merbau, dussia.

In order to properly make the effect of aging wood, you need to take old boards. They are the easiest to machine and absorb paints and varnishes well. It is desirable that they have knots. This will add even more beauty to the craft. If there are no such boards in the house, then you can ask your neighbors or acquaintances. Surely someone stocked these, but did not find a use for them. You can often get them for free. The young forest does not have many fibers, therefore it is difficult to process, it is better to leave it until the right time.

A master class on creating an aged tree can be easily found on the net. There are many videos and detailed descriptions of the process. So don't worry if you have no experience with natural materials at all. In just a few hours of studying the information, you can understand the essence of finishing and choose the easiest and most beautiful way for yourself.

There are many ways to create the effect of aging. Among them, there are the simplest ones, which take several hours, as well as more difficult ones, the production of which takes several days. Everyone chooses for himself, based on his stock of tools and the expected result. There are ready-made boards with the effect of antiquity on sale, but the process of creating them at home is much more exciting and pleasing.

How to age a tree with paint?

Painting is a mandatory part of all ways to create an aged tree. If paint is not used, then the outer layer is covered with a colorless or colored varnish. This is necessary to protect the outer layer and give a beautiful texture. Translucent glaze "Belinka" - the basis on which you can apply other layers of paint. It covers the surface after machining. Before coating with varnish or white paint, the surface must be treated with a soft brush to give relief. A colorless varnish is applied to a slightly dried paint. Thus, wood with a slight effect of antiquity is obtained. It comes out light in color and without gross damage.

If you like aged aggressive effect, then you can not do without multi-layer painting. Also here you should expose the boards to all kinds of damage: beat with iron rods, scrape, make holes with an awl. If you want to completely achieve naturalness, then you can make wormholes, but this option is suitable for the most daring and creative.

Wood, painted several times, acquires a deep color. Pinotex is often used for priming; it unevenly covers the surface. It also serves to create a thick color to the lowest layers of the board. After it dries, it is necessary to make minor damage to the surface and proceed to further processing.

Usage white paint is welcome in some cases. It will help create crafts in the spirit of Provence and give a beautiful shade. Since it can give a glossy sheen, it is recommended to dilute it with white spirit.

How to age a tree in Provence style?

To create an interior in Provence style, you can not do without old white boards. They have a very different purpose: they are used for shutters, for furniture or steps. After the main coating with a primer, the surface is covered with white paint. It does not have to be applied in an even layer. After drying, you need to walk with a brush to further achieve the effect of antiquity.

Loft involves the use of gray aged boards that resemble concrete as much as possible. They can be made gray using acrylic paints of the desired shade.

How to age a tree with your own hands in white?

If you need to paint the board gray, then you can do without paints. The chemical method of aging involves the use of alkaline agents or ammonia. When using this method, you need to take care of your safety: wear a mask and gloves. After treatment with alkali, the future product can be covered with a film to reduce the drying rate. When the craft dries, traces of alkali should be removed: for this, it must be rinsed with vinegar and brushed. The last stage is the coating with a colorless varnish.

How to age a tree using decoupage technique?

To make cracks on a product using decoupage technique, the surface is processed step by step with special paints. For the first layer, you need to take paint that will shine through small cracks. Next, you need to apply craquelure varnish on the dried first layer. It should be applied in a thick layer. After waiting for almost complete drying or speeding it up with a hairdryer, you need to apply the top layer with confident strokes. For small cracks, it is recommended to dilute acrylic paints. Craquelure on the craft can be considered ready after the paint has dried (30-40 minutes).

How to quickly age a tree?

The fastest way is the heat treatment of wood and subsequent varnishing. A blowtorch or burner will help you achieve the desired effect very quickly. The top layer of burnt must be removed to facilitate staining.

How to age a tree with a patina?

Aging wood with ammonia is a cheap way to get a patina effect. You can also use special paints with gold, bronze or silver particles to refine the wood. You can also achieve a patina with a stain. It is used for full or partial patching. The stain will protect the wood from moisture, fungus and mold. Of the minuses of its use, only one can be distinguished - the result is only a dark color.

aged wood effect

Imitation of sun-damaged and rain-damaged wood is popular for decorating country houses and modern apartments. You can’t do without such wood when creating certain styles in the interior. It is successfully used for the design of facades.

The need to obtain the effect of old wood can be caused by several reasons. For example, the desire to decorate (furnish, finish) the premises in the original style, the personal preferences of the owners, the lack of funds for the purchase of antiques, or some other considerations. It is quite possible to age a tree with your own hands, if you understand the existing technologies. This article will reveal several secrets on how to give it the look that is necessary for a particular interior with the appropriate processing of wood.

There are several methods of artificial aging of lumber, so the author will not separately specify which of the tools and preparations may be needed when implementing one or the other. After reviewing each of them, the reader himself will understand, in accordance with his capabilities, what will need to be prepared before starting work.

The main ways of do-it-yourself wood aging

Mechanical

This technique is called texturing, although it is better known as brushing (from the English brush - brush). It is she who is the tool with which the tree is successfully stylized antique. The essence of this method is that the "pulp" is extracted. As a result - the relief surface of the sample. Almost the same thing happens to wood over time - in the process of its shrinkage, under the influence of temperature, ultraviolet radiation, humidity and a number of other factors.

For mechanical processing of wood with your own hands, brushing is one of the simplest options. But not every breed is suitable for this method of imitation of old wood. The method is called texturing because the main task is to achieve a pronounced relief of the material.

What is brushed:

• larch, pine (and almost all other conifers);
• nut;
• ash.

Breeds that are not amenable to mechanical aging:

• maple;
• fruit trees (for example, cherry) and a number of others (expensive, exotic), less used in the decoration of apartments and houses.

Technology

For a mechanical method of aging a tree, you will need. The work is simple, you just need free time and patience. But this technique is suitable in cases where we are talking about a small amount of lumber.

If you want to age a tree over a large area, then it is more advisable to use an electric / drill or angle grinder ("grinder") with. Since speed already plays a role here, you should work in protective equipment and be extremely careful. The slightest awkward movement - and the tree can be hopelessly damaged. It is especially important if the finished product is processed - a table, a stool, a wardrobe, and so on.

Chemical aging of wood

Preliminary processing is carried out with sandpaper with abrasive of large fractions.

Option 1

Application over the entire area of ​​the ammonia solution. Ready-made ammonia, which is inexpensive, is also quite suitable. It causes darkening of lumber, giving it nobility and originality. As a result, the wood takes on an antique look.

Feature - this aging technology is suitable only for hardwood species. Their structure contains substances called tannins. It is they who cause the darkening of the wood.

Option 2

With the help of a polymer brush, a “light” cleaning of the surface is performed. The task is to achieve a clearer manifestation of annual rings. After finishing, the wood is stained and varnished in the appropriate shade.

Option 3

The tree is treated with stain. But not any, but necessarily based on water. After the desired color of the wood has been achieved, the composition is partially washed off (preferably with a damp soft sponge). This is done not over the entire surface, but in its middle part. As a result, the edges remain darker, which is typical for older wood.

Option 4

Patting. A more difficult type of chemical aging to implement, but the wood looks much more luxurious, imitating antiques as much as possible. The essence of the technique is to shade the pores that have opened during machining against the background of the rest of the surface.

Technology

After stripping the workpiece (a specific segment of the base), compositions selected for the general interior are applied to it. The simplest of them is, although there are also special preparations used to patch a tree. As a result, they fill the pores, which differ from the rest of the structure in a darker shade and contrast. Such work is carried out in several stages and requires a lot of time, since each layer is applied after the final drying of the previous one.

When aging a tree with your own hands, the technology can be simplified. To do this, the material is covered with a color-matched paint. Without waiting for it to "grab", you need to remove its top layer. The brush is useless here - it is enough to surface the wood with a “doll” made of soft cloth or a sponge.

Option 5

Coloring. The purpose of this technique is to create “bald spots” on the surface of the wood, imitating abrasions, which is one of the evidence of the solid age of the lumber.

Technology

It is necessary to choose two enamels that differ in color and consistency. After the initial staining of the tree, it is dried. Next, a second layer is applied, but for this a more liquid paint is taken. When this layer also gets stronger, the lumber in some areas is processed with fine-grained sandpaper. As a result, a shabby surface due to the fact that darker paint begins to show through in these places.

You can achieve a better effect with this method of artificial aging. For example, to designate "false cracks" that will further emphasize the age of the tree. Here you will already need the so-called craquelure varnish. It should be applied to the base before the primary painting of the surface.

Any work with your own hands implies the presence of at least minimal experience. Therefore, it is often impossible to achieve the desired result. How to be?

• Sand the aged wood.
• If its surface has bends, depressions, then these places can additionally be covered with stain. And in 2 layers. For the first - a "water" composition, for the second - on any other basis (gasoline, naphtha, alcohol). After drying, the wood is treated with a wax-containing preparation and polished.

Thermal aging

In fact, this is a complex processing of wood.

Stages of work

The first- firing over the entire surface or in a separate area. This is necessary to remove all the "pulp" and a clearer manifestation of the structure, growth rings, knots, cracks.

Second- mechanical restoration. With the help of a metal brush, carbon deposits are removed. In addition, it allows you to achieve the most pronounced relief of the tree.

Third(optional) - wood stain impregnation. Depending on the breed, this often results in a greater texturing effect. A single coat is sufficient.

Fourth- applying varnish. If the aged wood looks great, then it is better to use a colorless varnish. Its task is to protect the material from the negative effects of the atmosphere. In some cases, additional tinting of wood is made with varnish, but already in color.

• The author in practice used different sources of open fire and in the process of training came to the conclusion that the best option is a gas burner. If you work with a blowtorch, it is difficult to achieve a uniform flame. As a result, during aging, tan marks appear on the tree, which are quite difficult to level, and sometimes impossible.
• Before proceeding with surface treatment, it is necessary to “fill your hand”. Therefore, at first it is desirable to gain at least a minimum of experience by practicing on junk lumber. There will always be some kind of wood waste on the farm.

Restoration of the appearance of wood

This need is encountered everywhere. If the piece of furniture has served for some time, and defects have appeared in a separate area or over the entire area, the original decor has been lost, then this is relatively easy to fix with your own hands. In principle, this technology is one of the varieties of wood aging.

Operating procedure:

• Removal of applied layers (cleaning wood to the base). The skin is used. The grain size is selected based on the complexity of processing.
• The bare tree is covered (in 2 layers) with acrylic paint (black).
• Any furniture has a peculiar configuration. Consequently, all protruding places (corners, bevels, segments around the handles, and so on) wear out over time. After determining these areas, they are rubbed with paraffin. It is easy to find a candle in the house.
• Staining wood in the desired color.
• After the composition dries, the paraffin is washed off (peeled off), and dark paint will appear on the areas treated with it.
• Finishing.

The author recalls that the article indicates only the most easy-to-implement methods of artificial aging of a tree with your own hands. There are quite a lot of them, as well as the tools used, preparations. But if the meaning of all technological operations is clear, then it is easy to develop your own methodology. The specifics of the work and local conditions themselves will prompt what and how it is more expedient to do.

Brushing wood with your own hands is an interesting technology that allows you to artificially age a tree. The natural aging process takes decades. But now, with the help of special tools, this effect can be achieved at home quickly and without significant material costs. Aged material is ideal for decorating classic, vintage and rustic styles.

Brushing wood with your own hands: how the process is carried out

Residents of modern cities increasingly prefer styles with a pronounced individuality in the decor of the room: classic, vintage, rustic and country.

The main detail of such interiors is wood. Thanks to this material, the design of the room acquires a uniqueness and inimitable charm. But for a classic and vintage style, a tree in its original natural form is not suitable. In this case, an aged tree is best suited, which has a more attractive and noble appearance. This material is suitable for the manufacture of any element of decor: a vintage lamp, a wooden chest of drawers, stylish doors and window frames, fireplace lining.

Under natural conditions, the process of wood aging drags on for decades, since the original patterns on the wood surface are formed slowly and unevenly. Therefore, this material is rare and expensive. But among modern technologies there is a simple and fast way to artificially age a tree. This process is called brushing. Interest in this method is shown not only by lovers of elite vintage furniture, but also by those who want to diversify the interior of country houses.

Do-it-yourself wood aging (brushing) is a decorative technology for processing wooden products, during which an artificial effect of antiquity is created for an ordinary wooden surface. The method got its name from the English word brush - brush. The aging process is also called wood structuring.

The method of artificial brushing is based on the difference in hardness of the layers that make up the wood. In the process of work, the soft light layer is removed. As a result, the areas become embossed, which gives the material a special look that is inherent only in fairly old trees.

Types of safe finishing materials for interior decoration, their specificity and features of use, prices.

Process automation: machines and machines for brushing wood

Mass production of artificially aged wood requires speed of work. Some stages of wood processing can be mechanized, which will simplify the work of obtaining aged wood. To do this, you will need drills with speed control and special machines for brushing.

Consider the most popular models of specialized techniques for structuring a tree.

Festool rustofix ras 180 wood trimmer or brush machine. Wood brushing brushes can be purchased with this tool. They are of three types:

• steel wire brush for primary processing of boards;
• brush with synthetic bristles for intermediate grinding;
• sisal or hair brushes for polishing the back surface of the product.

The Makita 974 grinder is used for brushing wood. But during operation, difficulties may arise with the processing of areas at the corners of the part. Therefore, at the joints, it is recommended to use a special angle grinder with different nozzles or use a nylon brush dressed on the grinder for brushing. Such a brush is highly wear-resistant and allows you to process the ends, edges and contours of parts with complex shapes.

The Felisatti AGF 110/1010E grinder is suitable for processing both smooth and uneven surfaces. The tool comes with nylon and metal brushes.

Useful advice! It makes sense to buy a wood brushing machine only if large volumes of work are planned. Brushes for brushing wood can be bought both with a machine and purchased separately.

How to age a tree with your own hands: technology

The process of aging opens up the widest possibilities for the master to change the structure and color of different types of wood. Before proceeding directly to structuring, the wood must be prepared. The material for brushing should be free of defects, notches and irregularities, and the humidity should be 10-12%, but not more than 15%. If the tree does not meet these characteristics, then the wood fibers will tear during processing, and a beautiful result from structuring will not work.

Let us consider in more detail the process of how to age a tree at home. The work with the material can be divided into several stages.

Before starting work, it is necessary to perform the primary processing of the part, namely: to moisten the tree. This will prevent the spread of dust throughout the room during operation.

Next, you will need a manual brush for processing. Depending on the hardness of the wood, we choose the stiffness of the metal brush for roughing. The bristles of the tool must easily remove soft surface fibers, but must not damage hard ones. Move the brush in the direction of the fibers.

If you decide to automate the processing process with a brush for brushing wood on a grinder or grinder, then you should remember that the movements are carried out along the fibers. It is necessary to move the tool with such intensity that the fibers are effectively scraped out.

You need to carefully select the speed: too high a speed of the brush can cause the wood to bake. When using a hand tool, this problem does not arise, but more effort needs to be applied. Also, manual processing will be delayed in time.

Useful advice! It is better to select the speed on a separate small sample of the tree. The optimal number of revolutions is 1500-2200, but for different breeds it may differ.

Then we carry out the primary grinding of the part. To do this, we use a polymer brush with an abrasive applied to it. This stage will remove roughness and fiber fragments from the surface of the part. By removing all unnecessary, you can evaluate how deeply and efficiently the structuring of wood is performed. If necessary, the grooves can be further deepened, making the structuring more distinct.

At the next stage, you can think about the decorative design of the part. For this, recesses and grooves of arbitrary shape are made with a chisel in different places of the part. In appearance, they will resemble cracks that appeared naturally.

Next comes the final polishing. To do this, you need a sisal or hair brush. This tool for wood will give the details a finished look, fully showing all the decorative texture. In manual processing, instead of a brush, fine-grained sandpaper with an abrasive surface is used. It will allow you to make a perfectly polished surface of the workpiece.

Then the wood must be well dried. It must be completely cleaned of dust and thus prepared for further painting and varnishing.

The application will make the product look old by creating contrasting textured patterns. A generous application of the compound with quick removal of excess will allow you to paint over parts with soft fibers and leave light areas with hard fibers. Soft fibers quickly absorb paint, which means they are dyed, while hard fibers do not have time to absorb the pigment during this time, so they remain light. A tree painted with gold or silver paint looks especially beautiful.

Against the background of the natural color of the tree, this pigment creates glare on the surface of the part in the sun. This gives the product an original decorative effect and luxury. The product will look especially presentable if the tree is patinated - painting over the deepest cracks with darker paint.

At the final stage, the product is polished again to remove the roughness and irregularities that appeared after staining.

Useful advice! Lacquering is carried out on completely dry and cleaned wood. To paint brushed parquet, it is necessary to use a special parquet varnish. This will allow the finished coating to maintain a presentable appearance and performance characteristics for a long time.

Wood brushing: features of wood chemical structuring

Brushing with the help of chemistry is rare, even though the use of chemically active compounds greatly facilitates the process of artificial aging of wood. To carry out chemical processing of wood, it is necessary to have special knowledge and skills to work with chemicals. In addition, the method has a drawback - it is not always easy to buy the necessary reagents.

For the chemical structuring of a tree, acids are needed: hydrochloric and sulfuric, alkali and ammonia. Reagents applied to the surface of the material corrode the soft fibers. The master can only scrape off unnecessary wood.

Stages of chemical brushing of wood:

1. Surface grinding and decontamination.
2. Apply a thin layer of chemicals to the surface of the part. During chemical structuring, the evaporation of reagents must be monitored. If necessary, it is recommended to reapply them.
3. When the chemical has taken effect, that is, it has softened the outer fibers, the part must be washed under running water and the remnants of the reagent removed with a soft bristle brush.
4. Next, the tree must be thoroughly dried, painted or varnished.

The availability and demand for brushing allows you to perform this method at home. When structuring wood, it is imperative to adhere to safety regulations. Work with tools and a machine for brushing wood should be carefully and carefully. All artificial structuring processes must be carried out in special protective clothing, goggles and gloves. If antiseptic solutions are used during work or too much dust accumulates in the air from wood, then you should work in a respirator.

Brushing a wooden surface is an unusual way to make a piece of wood more beautiful, unusual and attractive. This method is very popular among interior designers and ordinary people, since everyone can artificially age a tree. You need to spend a little time and effort to get luxurious furniture or a chic original ceiling, stylized antique. For a better effect, patination of furniture can be carried out.

Artificial brushing of wood: the price of work

The main task of wood brushing is to create and emphasize the unique texture of the surface of the board. The result is a material with a clearly defined natural material pattern. The procedure is suitable for many types of material. The cost of standard brushing is 350 rubles. per sq. m. When ordering additional painting, the cost increases. The price of the work depends on the chosen type of wood, as well as on the size of the board.

The cost of each stage of artificial aging is usually calculated separately. You can order separately grinding or just impregnation. The most profitable option is a full brushing service from the beginning of work to the final coverage with the purchase of material. It is possible to perform artificial structuring from your material.

Wood brushing workshops perform an individual calculation of the cost of processing, depending on the type of wood, the size of the product and the list of services.

Brushing is performed over any kind of wooden materials:

• bar;
• lining;

• planks;
• block house;
• planks.

Scope of application of tree structuring technology

The structuring method is very popular in the manufacture of interior items and room elements. Such wooden products will be an original addition to classic and vintage interiors. In addition, the advantage of brushing technology is the ability to independently create exclusive things. In addition, this method belongs to the category of simple processes available to everyone.

Fireplaces, shelves, columns, wall panels, as well as aged wood are used as ceiling beams with a brushed board. This material creates a unique entourage for living rooms and halls, halls of cafes and restaurants. The interior design is filled with aristocracy and luxury, and aged wood creates warmth and comfort in the room.

Wooden furniture with brushed elements looks stylish and sophisticated. Artificial aging and patination of wood with your own hands allows you to make absolutely any furniture: cabinets, chests of drawers, pegs, beds. The use of brushed elements in furniture and interior design has no restrictions and prohibitions - it all depends on your imagination and creativity.