Bath cleaning with natural products. Detergents and cleaners for the bathroom What is the best product for washing the bath

September 5, 2016
Specialization: facade finishing, interior finishing, construction of dachas, garages. The experience of an amateur gardener and horticulturist. He also has experience repairing cars and motorcycles. Hobbies: playing the guitar and much more, for which there is not enough time :)

Every housewife dreams that her bath is snow-white and shone just like in commercials for detergents. However, as practice shows, the result after using them is very different from what advertisers promise us. However, do not be upset, in this article I will tell you how to clean the bath at home with “improvised” means so that the plumbing becomes white and shiny again.

Before I tell you how to clean a bath white with folk remedies, I will give a few tips for care and maintenance. By adhering to them, you will greatly simplify the process of washing plumbing, as well as extend its service life and retain its original appearance for a long time:

after using the bath, wipe it with a dry soft cloth;
make sure that water does not drip from the faucet spout and shower, as this will lead to the formation of a rusty coating. If the faucet is leaking, it must be repaired;
in no case do not try to wipe off limescale, rust or any other dirt with a metal brush;

do not allow sudden temperature changes on the surface of the bath;
do not put metal objects in the bath. Buckets and basins must be plastic;
before using detergents, make sure they are suitable for your type of bath. This is especially true for acrylic baths, which are exposed to chemicals (acids, alkalis, solvents, etc.);
wash the bath to white with detergents (no difference folk or purchased in the store) at least twice a month.

If you follow these rules, you will not have to puzzle over how and with what to clean the surface to get rid of rust, limescale, black spots, etc. In addition, plumbing will always shine.

Folk ways to clean the bath

Now let's look at how to clean the bath to white with home remedies, if it so happened that the surface still managed to "acquire" all sorts of raids and other contaminants. I must say that there are a huge number of all kinds of cleaning methods. However, we will consider only the most effective and proven ones.

These methods include the following:

Method 1: baking soda with vinegar and bleach

First of all, I note that this cleaner is intended for a bathtub made of cast iron, since it contains quite aggressive components. To prepare it, you will need:

food and soda ash;
bleach;
vinegar.

First of all, you need to mix baking soda with soda ash in equal proportions. Use a few tablespoons of each soda - this will be enough;
then add quite a bit of water to get a slurry of the mixture;
the resulting composition must be treated with contaminated areas;
after that, you need to mix bleach with vinegar in equal proportions and apply the liquid on top of the soda;
after half an hour, the surface should be wiped with a damp sponge and then rinsed with plenty of water.

As a rule, housewives are interested not only in how to wash the bath, but also in how to clean the tiles so that its surface shines. This tool is excellent for these purposes.

I must say that this composition does an excellent job with limescale, however, it can also be used to remove other types of pollution.

If you need to clean acrylic plumbing, you can use vinegar alone without baking soda and bleach. To do this, simply soak the wipes in vinegar and place them on the contaminated surface. After an hour, wipes should be removed and then wiped with a soft sponge and rinsed with plenty of water.

Method 2: citric acid

Citric acid is not only a very effective remedy for all types of plaque, but also a versatile one that can be used on both enameled sanitary ware and acrylic baths. The only thing, depending on the type of bath, it is applied in different ways.

If cast iron or metal, the instructions for using citric acid look like this:

in a glass of water you need to dissolve one and a half tablespoons of citric acid;
then the composition must be applied to the contaminated surface with a sponge or spray;
after fifteen minutes, the contaminated areas should be wiped off with a sponge dipped in a solution of citric acid;
when the surface is cleaned, the bath should be rinsed with cold water.

If the plumbing is acrylic, it is cleaned in a slightly different way:

First of all, warm water must be taken into the bath;
then add one and a half tablespoons of citric acid;
after 12 hours, you need to drain the water from and rinse the surface of the plumbing. It is even advisable to wipe it with a sponge dipped in a solution of soda, and then wash it. In this case, no acid is guaranteed to remain on the surface, which has a detrimental effect on acrylic.

Method 3: Borax with Lemon Juice

If you're looking for something to clean up a rusty bathroom, you can use borax with lemon juice. Moreover, this composition is suitable for all types of plumbing.

This tool is used as follows:

Pour a quarter cup of lemon juice into a container and pour borax into it. The amount of the latter should be such that a pasty consistency is formed, but at the same time the borax crystals dissolve;
paste must be applied to rusty spots;
When the paste dries, it must be washed off with water. The composition must go along with the rust;
if the stains are not completely gone, the procedure must be repeated.

If you need to clean metal or cement, for example, that got on it during repairs, use sewer cleaning compounds such as Mole.

Method 4: Cleaning Powder Paste

This composition is also designed to remove rusty plaque. However, it can only be used for enamelled plumbing.

To make this cleaner with your own hands, you need to prepare the following ingredients:

This tool is used very simply:

all ingredients must be mixed with each other in any order;
the resulting paste should treat rusty spots;
after that, you need to wash off the paste along with the rust with running water.

Method: 5: ammonia and hydrogen peroxide

Now let's look at how to clean an enamel bathtub to remove limescale. For this you will need:

The work is carried out in the following sequence:

First of all, you need to mix the components;
apply the resulting solution to contaminated areas;
after 15 minutes, wipe the treated areas with a damp sponge and then rinse the surface with water;
if plaque is not completely removed, repeat the procedure again.

With this tool, you can clean not only plumbing, but also tiles from plaque. The only thing before you clean the tile, wash it with soapy water to first remove the top layer of dirt and dust.

Method 6: soda with washing powder

Cleaning the bathtub at home can be effectively done with a detergent and soda based product. To prepare it, prepare the ingredients in the following quantity:

This composition is applied as follows:

dissolve baking soda and washing powder in hot water;
after that, treat the contaminated areas with a sponge soaked in the solution;
after 15-20 minutes, wipe off the contamination with a sponge dipped in the solution;
after that, the surface should be rinsed with water.

If you need to remove blackness from a metal bath, you can use a regular bleach, such as Domestos. The composition should be applied to the contaminated area and then rubbed with a sponge after 15-20 minutes.

Method 7: soda ash with laundry soap

A fairly effective tool for cleaning the bath from various types of contaminants is laundry soap mixed with soda ash. It is applied as follows:

laundry soap should be grated on a fine grater;
after that, the soap must be mixed with soda in equal proportions;
a small amount of water should be added to the mixture so that it becomes wet;
the composition should be applied to the contaminated area and left for an hour;
at the end of the work, the treated areas should be wiped with a sponge, and then rinsed with water.

Many housewives are interested in the forums - how to clean plastic panels? Soda ash with laundry soap does the job perfectly.

If the surface of the bath is too run down and covered with plaque, a small amount of ammonia can be added to the mixture.

Method 8: Trisodium Phosphate and Hydrogen Peroxide

Another old proven tool that allows you to clean a metal or cast iron bath from rust is hydrogen peroxide and trisodium phosphate. To prepare this detergent, it is necessary to prepare the components in the following quantity:

This tool is made by hand as follows:

dissolve trisodium phosphate in warm water;
then gradually pour hydrogen peroxide into the solution;
then you need to moisten the sponge in the solution and rub the rust with it;
if there are barely noticeable spots on the surface that do not rub off, they need to be applied with a solution and left for 10-15 minutes;
At the end of the work, the treated area must be washed with water.

Method 9: Oxalic Acid

If you need to remove rust from an acrylic bathtub, use oxalic acid. To prepare the composition, you need to dissolve the acid in water in a ratio of one to ten.

After that, the solution should be applied to the yellowed areas and left for an hour. After the specified time, the solution must be washed off with water.

Plastic panels for the bathroom, unlike the bath itself, are made of PVC, not acrylic. Thanks to this, chlorine, for example, whiteness, can be used to clean them. The only thing before cleaning plastic panels with chlorine is to take care of the ventilation of the room.

Method 10: table salt with wine vinegar

Finally, consider another effective remedy that allows you to get rid of even the oldest and stubborn rusty stains on the enamel surface. This tool is made as follows:

pour 100 ml of vinegar into a container and add a tablespoon of salt to it;
the container with the solution must be placed on the stove or in the microwave, and heated to a temperature of about 60 degrees.

When the solution is ready, it must be applied with a sponge to the rust and washed off with water after 20 minutes. As a rule, rust goes away after the first application of the composition.

Here, in fact, are all the folk ways to clean the bath from various contaminants. It should be noted that they are more effective than the advertised compositions. At the same time, the price of the components is usually several times less.

Conclusion

Each of the folk remedies described above is quite effective. Therefore, choose depending on the type of your bath, as well as the type of pollution and the presence of certain ingredients on hand. At the same time, do not forget that it is much easier to keep plumbing in a clean condition than to deal with dirt and plaque later.

For more information, see the video in this article. If you have any difficulties with cleaning the bath, ask them in the comments, and I will be happy to answer you.

September 5, 2016

If you want to express gratitude, add a clarification or objection, ask the author something - add a comment or say thanks!

The bath is often exposed to various pollution. In addition to the untidy appearance of plumbing, rust, limescale can become a source of a large number of bacteria, as well as the cause of an unpleasant odor. Traces are left by children's toys, shampoos and other products left on the sides.

Therefore, many housewives are interested in the question of how to clean the bath at home. Today, fortunately, household chemical stores can please us with an abundance of various detergents that will not only help wash a dirty bath from plaque, but also remove rust and other contaminants.

Before you start looking for a way to help wash the bath to white, you need to figure it out with the causes of stains and other stains.

Soap stain. The result of using various shampoos, bath products and ordinary soap is the appearance of a film on the surface of the water in the bathroom. It is not always possible to remove it with a simple rinse. This film eats into the surface of plumbing, and it is already impossible to do without detergents.
lime plaque formed from water of high hardness. This is the most common bathroom problem.
rust caused by tap water with a high iron content.
If the bath turned yellow, the reason for this was the old pipes, which are not always well washed.
usually accumulates on tile joints between parts, on window slopes, on the ceiling. This fungus is very dangerous to health, therefore.
colored spots may result from careless handling, spilled or spilled potassium permanganate solution, brilliant green and other substances.
Pollution from ongoing repairs. The bath is very prone to various stains, dust easily sits on it. Therefore, when carrying out repair work, it must be protected with a film or other materials.

In the old bathtub, the enamel is all cracked, into which any dirt easily penetrates.

Main types of pollution

To clean the bath from rust at home will help the following means.

Ammonium chloride. It is applied to the spots for a few minutes and washed off with water.
Lemon juice. The method is the same as with ammonia.
Cooking surface treatment salt and table vinegar.

Rust can also be cleaned with soda ash (sodium carbonate). It is sold in any household chemical stores. The procedure will be as follows.

Mix two types of soda (calcined and food) in equal proportions.
Add water to obtain a homogeneous mushy consistency.
Sponge or brush evenly distribute the composition over the surface of the product.
Table vinegar and bleach in powder granules are also combined in equal amounts.
Apply this mixture to baking soda.
Wait 30 minutes and rinse well with clean water.

Rust can also be treated with alcohol and hydrogen peroxide. These components are mixed in the following proportion: one part of alcohol and two parts of peroxide. The sponge is dipped in the solution and all dirty areas are covered with liquid. Washed with water after 20 minutes. Here's how alcohol and peroxide can clean up rust without leaving a trace.

limescale

It is washed off if you clean the bath soda and vinegar.

Mix baking soda with soda ash, apply to the surface of the product, leave for 30 minutes. After that, rub a little and rinse with water.
Paper towels are moistened in vinegar, which cover the entire inner surface of the bath. After 5 hours, the towels are removed, and the product is washed with water.

How else can you wash the bath from yellow plaque? Help out citric acid. 100 g of the product is dissolved in 400 ml of water. All yellow areas on the bathroom are covered with this product with a sponge.

Within two hours, the coating is repeated at intervals of 10-15 minutes. Then rinse well with water. The procedure is quite tedious, but it will perfectly help to wash the bath from yellowness.

It often forms in places where the bathroom is adjacent to the wall. It can be cleaned with activated carbon. Coal is mixed with whiteness to a mushy consistency and the composition is distributed over the mold fungus. Wash off with water after an hour.

Another effective way is using soda. How to clean the bath with baking soda from mold? Very simple. It is applied to the problem area in a rather thick layer, then poured abundantly with table vinegar. After the end of the reaction, everything is thoroughly washed off with water.

Ways for different types of baths

How to wash an acrylic bath?

An acrylic bathtub requires careful, gentle handling and the same cleansing. Care should become regular, consisting in rinsing after each use of the product using gentle means.

It is forbidden to use:

products containing alkalis and acids. They are detrimental to acrylic;
solutions containing alcohol;
bleaches with chlorine and other products containing this substance.

Wash an acrylic bathtub from limescale with a weak solution of washing powder. If the surface of the product is not damaged, then this method will perfectly cope with the task.

An acrylic bath at home is washed from rust and other deposits with table vinegar (which is preheated) and salt. An alternative would be a mixture of the same table salt and turpentine. The same products will help wash the acrylic bath from yellowness.

Because this cleaning method is quite aggressive, test it on an inconspicuous area before cleaning your acrylic bathtub with it. Otherwise, plumbing may deteriorate.

An enamel bath has a top layer that is quite thin. Therefore, in this case, all methods of rough cleaning are contraindicated. At home, you can use hydrogen peroxide, ammonia, proven soda and vinegar.

Rust is removed with porridge from water and soda, which is applied to the stain, kept for about one hour and washed off well with water. Whiten the surface of soda ash with the addition of food. Limescale will remove ammonia and fresh lemon juice.

You can also clean the enamelled bath with mustard. It will not only wash off dirt, but also disinfect the surface with high quality.

How to clean an old cast iron bath?

Such plumbing products are characteristic of old houses. The technology for the production of cast-iron bathtubs was based on the addition of zirconium salts to the material from which they were made. It is because of them that yellowed spots form after contact with water.

Wash the cast-iron bath from yellowness with table vinegar. Pour a full bath of water and add 200 ml of essence to it. Leave for 3-4 hours, rinse well with water. This versatile cleaning liquid has repeatedly helped housewives in different situations, making ordinary household cleaning more efficient and effective.

A good method based on soda and liquid soap will help to wash the rust off the bathtub. From these components, a slurry is prepared, which is rubbed with rust and its streaks.

Ammonia will help out from very old stains. It should be added to 0.5 cups of liquid soap and spread over the surface of the bathroom. After this procedure, the bath will become shiny again. If you know how to clean an ancient cast-iron bath, you won’t have to change the product for a new one, and it will last more than one year.

Removal of other types of contaminants

These two components are the most common types of pollution in the bathroom. Even a weakly concentrated solution of manganese will leave dark marks on the surface of the product.

A drop of brilliant green solution will also add color.

Manganese is washed with a solution of hydrogen peroxide and lemon (or fresh lemon juice), they will not only quickly discolor the stains that have appeared, but will make the bath shine.

We remove the greenery with alcohol. However, if the surface of the plumbing is made of acrylic, then alcohol may be powerless before contamination.

How to wash the bath after repair?

In order not to have to deal with its consequences on a soiled bathroom upon completion of the repair work, the product must be protected from building materials. If something goes wrong, you can use by the following means.

Any solvent (for example, white spirit) will help to wash the bath of paint. It is important to work quickly so that the paint does not have time to soak into the surface.
Rinse off dusty deposits with warm water, then clean with citric acid.

How to wash the sealant from the bath?

Sealant is another type of bathroom contaminant. It is used to ensure the reliability of joints and seams. Sooner or later the question arises.

In this case, you can use folk methods using table salt, but it is better to buy professional products specifically for such cases.

How to clean an old bath?

If the bath is far from being the first year, then pollution appears on it very quickly. They penetrate into all microcracks that have formed on the surface over time.

Not all cleansers can easily restore its original appearance. Better, of course, to replace the plumbing. But if this is not possible, then soda ash will help. The procedure for working with it was described above.

Cleaning chrome surfaces

Faucets above the bath, shower hoses require no less attention than the plumbing product itself. Limescale and rust also appear there - the first enemies of bathrooms. Faucets, handles on the bathroom and other elements are covered with chrome.

From the chrome surface, the universal baking soda, which is applied to the products, will clean the rust. You can also use table vinegar or tooth powder. All components are evenly distributed over the objects with a sponge or soft cloth. The chrome parts are kept in this state for about half an hour, then washed with water.

There are many ways to answer the question of how to wash the bath from various contaminants. Follow the above rules and recommendations, and your bath will shine. But it’s better not to wait for a general cleaning, but to take care of the product regularly, then you won’t have to waste time and effort on removing significant old stains.

The quality of tap water, long-term use, lack of proper maintenance and many other factors often lead to bath contamination.

Even high-quality new plumbing is subject to negative influence, and what can we say about the one that has been used for more than a dozen years!

Rusty stains, plaque and sediment that have not been removed in a timely manner call into question the sanitation of the house.

How to clean the bath to white and at the same time fix the result for a long time? Which products are safe and which are not? The means for cleaning plumbing must be chosen very carefully, carefully reading the composition and instructions.

You can now find at least a dozen bathroom cleaners on the shelves of the household departments of supermarkets.

Oddly enough, often they do not have an effect or, on the contrary, act too strongly.

What should be the first thing to think about when choosing a tool?

Composition and intended purpose

If the bath has not seen brushes for a long time, and the enamel has begun to darken with time, the situation is unlikely to be saved by an ordinary remedy.

In this case, you need to choose a strong cleaning agent containing an acid - best of all, a gel or liquid substance.

But if the plumbing is kept clean and just needs regular cleaning, then it is better to choose a less strong remedy.

Cleaning a bathroom from rust, for example, always requires a lot of effort - but it is equally important not to overdo it with these efforts.

If rust needs to be removed from an enameled bath, do not take too strong a product and do not leave it for a long time.

For example, "Sanoks" acts very quickly, washing away all rusty spots - but along with rust, the enamel surface is quickly washed off, exposing the unsightly lower metal layer.

It is better to put in more effort and rub the surface more thoroughly than to pay five times as much for the restoration of enamel or for the purchase and installation of a new bathtub.

Safety

You should never forget about it - this is especially true for those in whose house there are small children, allergy sufferers and just people with sensitive skin.

Finding yourself in a bathroom with chemicals not completely washed off is guaranteed to get health problems.

Rinse off the detergent from the surface carefully, using a soft cloth or sponge, and do not spare water for re-rinsing the bath.

Household chemicals for cleaning the bath

The best bathroom cleaner is one that doesn't require a lot of application and rinsing, doesn't harm surfaces, and is safe for people and pets.

The most effective, but at the same time gentle coating, are the following means:

"Cillit Bang" - suitable for regular cleaning, but with very complex contamination (limescale, rust) may not be able to cope.
"Cif", preferably in the form of a gel. Especially effective series "Ultra White".
"Comet" in the form of a gel - a universal remedy for all plumbing and kitchen surfaces, can help with difficult dirt. The series “7 days of cleanliness” is best suited for baths - with it the effect lasts longer.
Domestos, liquid or gel, is suitable for regular care, copes with medium-sized stains or with not particularly neglected cases of pollution. The disadvantage is the pungent smell of chlorine, which the product has.
"Pemolux" is ideal for cleaning enamelled baths, as it contains soda. Although the powder scratches the enamel a little, it can still be used for regular cleaning of not the newest bathtubs.
Acrylic hot tubs cannot be cleaned without Sun Clean, Triton, or Mr. Cleaner. Since acrylic is a very fragile coating, only special products that do not contain acids and potent substances, and also do not scratch its surface, are suitable for it.

All these products are officially recognized, pass dermatological tests and laboratory tests. However, they must be handled with care.

Folk remedies for cleaning baths

But what if you simply cannot afford to use good products or if the health of someone from your home does not allow them to be used? In this case, tried folk remedies will come to the rescue.

With regular use, silver quickly becomes covered with plaque and blackness. can even be done at home.
And all numismatists will be interested in tips on cleaning old coins. Read how to clean coins to make them shine.
Even protected ironing surfaces sometimes accumulate dirt. Learn more about cleaning the soleplate of an iron.

To clean the bath to white, our mothers and grandmothers always used soda. This universal tool is very budgetary, but trouble-free.

It is necessary to mix soda ash and baking soda in a one-to-one ratio and gently evenly apply it to a wet bath.

After leaving the mixture on the surface for 7-10 minutes, you should proceed to the second stage - a mixture of bleach and vinegar is applied on top of the soda. It is done in the same proportions. A small amount of bleach powder is enough for a regular bath.

After forty minutes, the entire mixture must be thoroughly washed off. Cleaning the bath with baking soda gives a striking effect - even old plumbing shines like new or restored.

Vinegar

If soda is more of a method for old baths, then for new ones that have recently lost all their luster, you can use a weaker remedy: vinegar.

Cleaning the bathroom with vinegar can take several hours - it is difficult to overdo this remedy. In order not to suffer with solutions and not figure out how to wash stubborn walls, it is better to do the following.

Moisten large paper towels strongly with vinegar and cover the entire bath with them - from the edges to the bottom, leaving it to soak for several hours. After that, it is enough to remove the wipes and rinse off the remaining vinegar with water.

Vinegar is also the best cleaner for a cast iron bath.

To remove unwanted yellowness from the old bath, a solution of the most ordinary citric acid is used. The solution is made at the rate of one sachet per glass of water.

The resulting product is blotted with a soft sponge and wiped over the entire bathroom, then left for 15-20 minutes. All operations should be carried out with gloves - citric acid is safe for enamel, but detrimental to the delicate skin of the hands.

After all the acid should be washed off with water, if necessary, clean the problem areas with soda. Cleaning a cast-iron bath is also not complete without citric acid.

Limescale removers

Often a situation arises when simply removing yellowness is not enough - you have to deal with limestone deposits that water leaves on the walls of plumbing. But there are also resources for this!

Dissolve ammonia in water at the rate of three tablespoons per glass of water. Wet the plaque with the resulting mixture and leave for 10-15 minutes - after that it can be easily cleaned even with a stream of water.
Apply lemon juice or a concentrated solution of citric acid to areas with plaque, leave for 10 minutes - after which it is easily washed off.
If the plaque is strong or old, a mixture of vinegar and salt will help well. Mix them in a one to one ratio and clean the bathroom.

As you can see, even a serious cleaning of the bathtub at home is possible not only with the help of a mass of special tools or the efforts of the cleaning team - it is quite possible to do it on your own.

In order not to harm the coating of the bath, especially a new and expensive one, you should know at least the elementary rules for selecting cleaning tools.

So, for example, the following items cannot be used to clean enameled bathtubs: metal brushes and fiberglass sponges.

When choosing tools and tools for, never take the following:

Washing powder;
abrasive paste;
Emulsions and other means on alcohol;
Petrol;
Acetone;
Chlorine.

Traditionally cupronickel cutlery is very popular with us. Learn simple household tools.
Such complex equipment as a washing machine needs high-quality timely cleaning. Read on for washing machine care tips.
Got a lot of green stuff on your skin? It describes simple ways to quickly wash brilliant green.

Always use gloves when cleaning the bathroom. When rubbing the bath with a strong agent, never use hard brushes - acid droplets will scatter around the room, get on surfaces, and, most offensively, on the skin and eyes.

Remember that the whole family has been dirtying the bath for more than one day, and for more than one week, and therefore do not strive to give it its original appearance in a day.

It is better to clean the plumbing a little, starting with the most polluted complex areas - then the result will be visible and there will be motivation to work. And sanitation in the house and a white shiny bath will prove that all the efforts were not in vain.

Everyone wants their bathroom to be in order. But in order to be clean, you need to buy detergents and cleaning products for the bathroom. At the same time, everyone wants it to be not only cheap, but also of high quality. The surface of the bathroom can be damaged by products that can scratch it. That is why experts advise buying cleaning products that will be gel or have a liquid composition.

How to choose the right detergent

When choosing a tool, you need to pay attention to a number of recommendations, which are listed below:

It is not necessary to buy a tool at a high cost. Since not every remedy that is expensive is good in quality;
Pay attention to the composition of the tool. It must not contain substances hazardous to health;
The bath product should be quickly washed off so that there are no allergic reactions in case of contact with the skin;
It is more economical to buy a product in a large bottle.

It should not be completely liquid in consistency. Related to this is the consumption of bath fluid. Regardless of the cost, trust only a reliable manufacturer.

In order to make the right choice, you can look at the catalog of detergents and cleaning products for the bathroom presented on our website.

You can also find prices for detergents and cleaning products for the bathroom in the product catalog section.

How to choose the right cleaner

There are many manufacturers of detergents. How to choose the one that is right for you. When choosing, pay attention to the following:

The product must be suitable for daily use. It must fight rust and plaque, which periodically forms;
It is better if in its composition it is not a dry consistency, but in the form of a gel;
Choose a product that can be used not only for washing the bath, but also used in the kitchen and in the toilet room;
It is better if there is no strong smell of chlorine;

Please note: if you have an acrylic bathtub installed, then not every product will suit you.

How to properly clean a bathroom

To ensure that cleaning the bathroom does not give you trouble, you need to wash it regularly. In this case, you can use the tips:

Moisten the walls of the bathroom with water;
Apply the product on a soft sponge and evenly distribute it over the surface;
If there are stains, you can rub them with a brush. Be careful not to damage the surface;
The final step is rinsing with water.

If you want to keep the bathroom clean, use only trusted products.