Repair structural roller how to use it. All about rollers for decorative plaster. How to choose a textured roller

When it comes to beautiful wall decoration, decorative plaster rollers are a good solution, along with the use of this material as an internal coating. Of course, a spectacular texture can also be obtained with the help of other tools, for example, applying light strokes with a narrow spatula, but the roller is the most practical. It remains only to find out what forms this tool takes and what results can be achieved with its help.

What are the rollers for decorative plaster

Initially, wall decoration was carried out exclusively with the help of paints, plaster was needed only for applying frescoes on it. In this regard, only paint rollers were used, from fur, and later from foam rubber, polystyrene and other artificial materials. But over time, new techniques for decorating plaster coatings appeared, especially for the “Venetian”, which required the use and radical change of tools. All sorts of applicators, stamps, combs and, of course, textured rollers appeared, based on a coarse-mesh foam rubber prototype.

According to the materials, the aforementioned foam rubber and foam plastic, as well as rubber and leather rollers for decorative plaster are distinguished. More exotic options are also possible, for example, home-made, carved from wood, that is, piece work. According to the texture, the surface of these tools can imitate marble stains, brickwork, wood fibers and even mat weaving. Also, nozzles are used for embossing simple and complex patterns, for which a repeating pattern is applied to the working surface, the end of which goes to the beginning. Coarsely porous foam rubber creates roughness of varying degrees of depth.

Textured rollers to imitate various materials

If you want to create a relief on the surface of the wall by covering it with plaster, it is necessary that there is some structure on the surface of the tool. To obtain protruding prints, textured rollers should be with recesses reflecting the selected pattern, if, on the contrary, the pattern on the wall surface should be extruded, use a work surface with a relief pattern. In particular, if we need an imitation of brickwork, we take a regular, even rubber roller, make two annular channels, dividing the work surface into three equal parts, after which we cut out transverse notches on each of them in a checkerboard pattern. We get a rectangular imprint in each row, they will be bricks.

To imitate marble, it is enough to take a roller with a nozzle made of crinkled leather or fabric. At the same time, during operation, movements should be made uniform, without lifting the tool from the surface for as long as possible. Another way to get a structural roller with your own hands is to wrap a rubber nozzle with a bundle of the same material, making turns in an arbitrary direction. With such an uneven work surface, wood fibers can be depicted. It is possible that the direction of the turns will have to be corrected to obtain a more reliable texture. And, finally, by sticking a piece of coarse fabric on the rubber nozzle, you can get an imitation of textile upholstery. Almost any imitation can be obtained with a foam nozzle by applying the desired pattern to its surface.

Structural rubber roller for complex patterns

In childhood, many are fond of making stamps from erasers, which can be used more than once by rubbing with a graphite pencil rod or ink paste of a ballpoint pen. Approximately the same is a structural rubber roller, only the pattern on it is closed around a cylindrical working surface. Once upon a time, such rollers began to be produced so that the owners could make prints on wallpaper for painting at home. However, over time, ready-made wallpapers with various patterns appeared, and a special decor device turned out to be unnecessary. A tool for decorating walls with plaster came in handy.

But if an ordinary nozzle with a small relief can be easily used to apply a fairly liquid decorative composition, then is a figured roller with a pronounced pattern suitable for this purpose? Unfortunately no. The fact is that a textured nozzle with small irregularities allows you to capture a fairly thick layer of the mixture, and in the process of applying it, the layer turns out somewhere thicker, and somewhere thinner. If strongly protruding figures of the drawing are cut out on the working surface, only they will be printed on the wall, the rest of the space will not be covered with plaster.

But such tools are great for getting a picture on an already finished surface. It is not news that even the fastest-drying composition freezes for about twenty minutes. This time is enough to pick up a roller and roll it over the surface of the finished area. It is only necessary to observe one rule: the movement must be carried out from top to bottom, at the same speed along the entire length of the decorated strip. The next pass of the tool must be made close to the previous one, without indents and overlaps.

How to make a structural roller with your own hands

Today, tools for creating a textured pattern on a freshly plastered surface are commercially available. They are made of rubber and have a stamp strongly protruding above the base in the form of one or another pattern. However, it is much more pleasant to do something unusual on your own in order to end up with a unique pattern. So, what is needed for this. First, a regular rubber roller for smoothing wallpaper. Secondly, you need to find dense thick rubber about a centimeter thick (you can take a couple of dozen erasers, but this is a last resort). And finally, we need rubber glue.

From a sheet of rubber or from an eraser, we cut out a figure, for example, a leaf of a plant. If the fragments of the pattern are pasted at large intervals, the shape of the base does not play a role, otherwise it is better to make the fragment so that there is no difference which side becomes working. The next element, in continuation of the plant theme, will be, for example, a flower. You can make stems, buds, berries, the content of the pattern does not matter, the main thing is that it be continuous around the entire cylindrical surface of the tool nozzle. All parts are fixed with glue from end to end, the metal rod (clasp) on which the nozzle rotates is usually bent so that it does not interfere with changing the diameter of the nozzle at all.

The sizes of machines, consisting of a handle, a yoke (metal rod) and a roller, can be different: short, within 30 centimeters, medium, from 35 to 45 centimeters, and long, from 50 centimeters and more. Special extension handles are also produced, from 70 centimeters to 4 meters.

In order for the pattern to turn out to be of the highest quality, it is advisable to round off the working surface of all glued parts. This will allow the curly elements to sink into the surface of the plaster gently, without disturbing the prints with sharp edges. You should not rush and create a pattern as soon as the plaster covers the wall. The fact is that the fresh mixture will stick to the relief of the tool, clog between closely spaced elements and, accordingly, remain on the roller. It is better to wait about ten minutes (or longer, depending on the finishing material used) to allow the composition to dry slightly.

Is it possible to apply plaster with a roller - this is a question for amateur finishers who plan to do repairs on their own. Professionals say that it is possible, since such work does not require special skills in construction. You just need to know how to select and use the material and tool.

Decorative plaster under the roller should not contain large fractions, since such a product is applied with a spatula. Professionals advise using a ready-made composition. The tool is easy to apply, and even non-professional craftsmen can work with the product. The finished composition also does not change shade after drying, unlike dry mixes.

Types of plaster

Applying decorative plaster with your own hands with a roller begins with the choice of material and tools, but before that you should familiarize yourself with the concept of "decorative plaster". This is a product containing various fillers. Most often, wood fiber and stone chips are used. The components bind acrylic and polymeric substances. Such components are also responsible for the elasticity and drying speed of the product.

There are several types of material suitable for this tool.

Structural plaster

Such material forms a smooth coating on the surface. To apply the product, use a different tool, including rollers for decorative plaster. Structural product usually comes in light shades. To give color, a special color is used, which is mixed with the material before application.

Venetian plaster

It is a product that contains marble flour and an aqueous emulsion. The advantage of the material is that it can be tinted in any tone. Before using the product, the surface is leveled. Venetian plaster creates a coating on the building base with the effect of marble, leather, granite, cork, etc. The product is environmentally friendly and water resistant, therefore it is used for decorating surfaces in rooms with high humidity (bathroom, swimming pool, etc.). The disadvantage is the high price.

Textured plaster

This tool forms a relief on the surface immediately after application. This result is achieved thanks to the granules that are part of the product. Based on this, the material is classified into coarse, medium, fine and fine textured. As video tutorials show, applying textured plaster with a roller is a simple process, but requires careful study.

Types of rollers

The tool for decorative material is divided into several types.

Roller material type

The final result of finishing depends on the working surface of the roller. Classification of tools by type of material:

• Rubber rollers. Such tools require repair skills, so the devices are not recommended for beginners who do the work with their own hands. The rollers form a clear texture on the surface due to the protrusions and recesses located on the roller.
• Wooden tools. They are suitable for non-professional finishers, because, unlike rubber products, plaster does not adhere much to the surface of the roller. The disadvantage is a short operating period. Over time, the wood swells and flakes off, which makes the tool unusable.
• Plastic rollers are budget tools. This is the only merit. Disadvantages - they are deformed upon contact with the material, cracks appear on the roller, which negatively affects the final result of the finish.
• Leather tools. Such rollers are used for applying Venetian plaster. The tool helps to create a marble effect on the base. Professionals advise using a roller with a surface made of natural, not artificial leather. Such a roller has a longer operating period.
• Pile tools. The surface of the rollers is made of natural or artificial fur (as in the photo below). The final result of finishing depends on the length of the pile - if it is short, the surface will be smooth. When choosing such a tool, you should pay attention to the quality of the fur. If hairs fall out of it, they will settle on the surface, which will spoil the appearance of the finish.

There are also foam, foam, and fabric tools, all of which create texture on the wall.

According to the type of pattern

According to the type of final pattern on the surface, the tools are classified as follows:

• Textured rollers. Such devices create an imitation of natural stone, fur, leather, etc. on the surface. The relief depends on the surface of the roller. For example, for marble, a tool with a leather base is used. Textured plaster, applied with a roller with a long pile surface, creates a “fur coat” relief. To obtain a convex pattern, it is recommended to use a tool on the roller of which there are recesses, and for a depressed relief, a roller with a protruding relief.
• Structural tools. Such rollers are used to give relief to the coating. The pattern on the roller is clear, closed in a circle. Thanks to this tool, the effect of volumetric wallpaper is created on the surface. Video tutorials demonstrate that decorative plaster is applied with a structural roller on a prepared building base.

To size

Types of rollers by size:

• short - roller length up to 30 cm;
• medium - surface length 30-50 cm;
• long - from 50 cm.

How to make a roller for decorative plaster yourself?

Roller manufacturing methods:

• Wrap the rubber roller of the roller with a rope made of the same material. Turn the turns in a chaotic manner. To securely hold the tourniquet on the roller, fix it with glue. Such a roller will create an imitation of wood on the surface.
• Roll a tourniquet from any fabric. Lubricate the surface of the roller with glue. Wrap the tourniquet around the roller. With such a tool, an imitation of wood is also created on the surface.
• Apply glue to the roller. Wrap a single piece of fabric around the roller. Such a tool will create a textile texture on the surface.
• Cut out the elements of the future pattern from the foam rubber. Apply glue to the pieces and fix on the roller.
• Apply glue to plastic wrap or any mesh. Stick the material to the surface of the roller.

Material application rules

Textured plasters applied with a roller create unique reliefs on the surface. To achieve the best result, experts advise adhering to a certain work algorithm.

Preparation of the building base

Free the base from the old coating. To make the work move faster, the masters advise using special liquids and solutions. After dismantling the wallpaper or paint, tap the building base with milk for hidden defects. If differences are found, cut off the irregularities. Then degrease and dust the surface. Apply primer to the walls. Fill all defects with putty. After that, apply the material to the surface. Wait for complete drying, clean the base and prime.

Solution application

There are several ways to apply decorative plaster with a roller. The choice of method depends on the tool used and the final finishing result.

Applying the solution with a textured roller:

• Pour the solution into a special cuvette. Immerse the roller in the agent, wring out excess material.
• From top to bottom, apply plaster to the wall. Do not change direction for the following treatments. Do not tear off the roller from the base until the end of the run. If it moves away from the surface, the drawing will fail. Press the tool against the wall not too hard, but not weak.
• Apply the next strip close to the previous one. Do not apply material spacing or overlapping.
• Textured plaster with a roller is applied in one layer. For this reason, the thickness of the material must be the same in all areas.

Algorithm for applying plaster with a structural roller:

• Apply the working material to the surface. It is recommended to use a spatula for this.
• Wait until the product hardens a little. Do not use a structural roller on liquid putty. The tool will not leave a mark, as the composition will clog the pattern on the roller. It is also impossible to wait for the complete solidification of the composition. On a hard surface, the drawing will not work.
• Fix the roller on the wall under the ceiling, press its surface and lead down without tearing it off the base. Try to make sure that the pressure is the same throughout the area.
• Make the next stripe of the pattern close to the previous application. The drawing above should begin with such a fragment as in the previous processing. Do not allow discrepancies, otherwise the pattern will not work.
• After the relief is completed, paint is applied to the surface if a solution without color was used. To do this, wait until the material has completely solidified. After that, paint the surface.

Instructions for applying two-color plaster:

• apply one-color plaster to the surface - this will be the main color of the coating;
• prepare a solution of medium consistency and mix the product with color;
• Use a roller with a soft roller to apply the solution to the surface with chaotic movements.

The video in this article demonstrates how to properly apply decorative plaster with a roller.

With the help of a roller and decorative plaster, patterns are created on the surface that amaze with beauty. The main thing is to follow the rules of work.

Plastering is an important stage of finishing work. Plaster not only evens out and protects the surface of the structural elements of the building, but also gives them certain textures and colors.

Creating a plaster layer requires skill and knowledge, in particular about the available arsenal of materials and tools, their properties, functions, as well as when and in what combinations they are used.

Special rollers are used as a hand tool in the so-called "wet" plastering work. With their help, the master creates the last layer of coating on the surface, performing protective and decorative functions.

What is this tool?

The decorative roller is called the working body of the tool rotated by coupling with the surface to be treated.

• applying paints and plasters with a layer of unequal thickness;
• to give a decorative unevenness to laid, but still wet plaster.

Roller revolves around a metal rod connected to the handle (the entire base structure is called the “roller handle”).

The roller consists of a rigid (usually plastic) base - a cylinder with a through axial hole and a working surface, giving elasticity to the roller, as well as the properties of the decorating tool.

Types of rollers by type of material

The name of each decorative roller includes information:

• about the material of the working surface;
• about the effect it will create;
• and, sometimes, the properties of the recommended plaster composition.

More often, the rollers are removable and characterized by their length and diameter(sometimes diagonal), as well as the thickness of the rod of a suitable handle.

A soft working canvas, gaining a plaster mass, is often called a "fur coat". So they say about pile and foam rubber.

Hard and elastic rollers, the pattern of which leaves a distinct imprint are made of rubber, wood or plastic.

Skin, fabric form soft, flexible canvas with variable outlines. The stiffer the roller, the higher the requirement for evenness of the wall.

Rubber - chemically resistant and non-toxic material, easy to clean, does not absorb moisture, long service life. Rubber products are inexpensive.

On a smooth textured plaster that has not set, a pattern is pressed with a rubber roller with a convex pattern. From impressions created by some other instrument, the result have the same depth and even distribution of pattern elements.

The step of the ornament is the greater, the wider the roller (the width increases due to the diameter of the base).

There are rubber sponge rollers with large porosity. They are doing well with the application of plasters with decorating filler.

Wooden

The contact surface of a decorative wood roller is formed either by gluing the parts to an even cylinder, or cutting holes in it.

Due to the hardness of the material, excessive force applied to the wooden roller, can leave a trace not only from the drawing, but also from the “background”. This is not bad for border design, when border imprints are not only acceptable, but also form part of the design.

Plastic

From molded plastic, surfaces for embossing are obtained, from gas-filled - foam rubber "fur coats".

The molded plastic working surface of the plaster roller is easy to clean, but sometimes "inaccurate" in work with some compositions due to its hardness and sticking with the working mixture. In terms of service life, plastic is inferior to rubber, but has a lower cost.

Of thin plastic, soft or rigid, compressed, twisted or otherwise folded and wound around a rigid resilient roller, get a working surface for easy embossing with an unobtrusive pattern.

Soft perforated plaster roller creating a fine-grained surface, the relief of which is formed to a greater extent by decorative filler than by the shape of the surface of the tool.

Do you know how to finish wall putty on wallpaper? This article describes the process of doing the work yourself.

The decorating ability of the leather roller is achieved material arrangement on the basis with the formation of folds.

Depending on whether the folds are fixed with glue or freely located, the pattern, which is unique in itself, will come out on the wall. regular or as natural as possible.

The last - "free" - option indispensable when creating the texture of marble. But without observing other additional conditions, there will be no such effect, the roller will create an equally interesting, but more “cozy” pattern.

Hard fixed leather "wrinkles" will leave embossed unidirectional pattern, similar to a rubber print, but softer.

Brush roller applies a plaster coating with a roughness the smaller and more often, the shorter the pile.

Surface may become slate-like, or covered with an openwork non-woven fabric. The effect depends both on the thickness and material of the pile, and on the type of plaster.

Pile is made of polyacrylic, polyester, polyamide, natural fur is also found. Such rollers are often used for painting rough surfaces and to create a plaster coating with an unobtrusive texture that does not focus on the volume of the room, masking the unevenness of the wall.

By type of drawing

To determine the type of pattern of a decorative roller for plastering, it is better to focus on its appearance than on the name.

The descriptions of this tool always contain the words "textured" and "structural", despite the fact that these are not synonyms, the same tool can be found named in one way or another, or even with two words at the same time.

Structural

Even with the current confusion over terminology, it's easy to see that the word "structural" is commonly found in the trade names for foam rollers.

It is the spongy surface and captures pore-sized aggregate and without dragging, "puts it in its place." The decorative effect is created by the structure of the plaster.

Most of those rollers with which plaster is directly applied to the wall are suitable for structural compositions. Their folds are designed to “not interfere” with the work of a large aggregate and, if desired, add relief patterns, imitating natural material.

Textured soft roller can visually imitate the presence of inclusions in the plaster - that is, to create a coating with the texture of structural plaster.

The purpose of using textured rollers is give the surface the appearance of any material: natural stone, tree bark, leather upholstery, patterned wallpaper and more. etc. An example can be seen in the photo.

Undeniably textured - solid rollers with embossed or convex details. Their property is the predictability of the result. On a fresh plaster layer, they leave a clear pattern of the same depth throughout the area.

To maximize the decorative effect, the plaster aggregate must be thin.

The same rollers on dried plaster leave a colored pattern with paint. Such rollers are especially it is important to roll exactly in a straight line.

How to do it yourself?

The design of the paint roller is simple and familiar, but there is no need to make it in a handicraft way. BUT convert work surface, or create a new one - the task is feasible, not expensive and win-win.

1. Wound on a smooth roller hard waterproof fabric(or wet, but dense), crumpled or twisted, will add to the arsenal of the master a tool for creating a natural pattern on the plaster.
2. If the cover of the pile roller is “interrupted” with a twine wound with a noticeable step, multi-level roughness can be achieved with a directional pattern. You can also cut out spots or grooves, then the pattern of the “fur coat” relief will become more difficult, and the “spider webs” will become more delicate.
3. Small smooth objects, pasted on a roller with a thin working surface (for example, velor), or on a rubber one (for wallpaper), will leave a clear rhythmic pattern on the plaster.
4. Add surface extra, periodic relief level carved "holes" in the foam roller or a rope wound around it with a large pitch. And by wrapping it around a smooth roller, it is easy to get a tool for clear embossing with a unique pattern.
5. Proficiency in wood carving will allow you to create a cliché with a complex and readable pattern. Copy paper will transfer the contours from paper to wood.

How to apply decorative plaster "fur coat"?

The plaster composition, including cement and fine sand (1:3, 1:2, 1:1), forms a "fur coat" coating, if diluted to the consistency of thick, viscous paint and applied with a long pile roller.

The choice of slag or pumice sand is preferable (then the mixture is stirred for at least 2 minutes).

Too liquid solution will drain both from the tool and from the wall, and too thick - it will not cover the pile of the roller to the full depth.

In the second case, you can apply the mixture with a spatula, and the roller will become a tool that gives the layer of slightly set plaster the texture of a “fur coat”.

Mixture with the addition of coarse aggregate requires the use of a short pile roller, and diluted with water in the ratio specified by the manufacturer.

Decorative facade plaster with a roller includes the following steps:

1. The surface is cleaned of foreign materials and loose layers, of oil stains and salts that have come out, the irregularities are filled with leveling plaster.
2. With a hard sharp tool, notches are applied in the form of an oblique grid - on the wall.
3. The entire surface is moistened and primed twice (with a brush).
4. The plaster is collected with a roller from the paint bath and applied to the wall, without pressure, in the longest possible parallel strips, without gaps.
5. To apply the second layer, you do not have to take a 1-2-day break for drying, it is enough to slightly level the seized previous layer.

Alignment of the covered layer of plaster "fur coat" gives the surface the texture of a cork coating.

When choosing decorative rollers for plaster, it is worth remembering that different patterns they look ugly side by side. At the end of the work, both the roller and the rod require thorough cleaning and drying.

Textured rollers for decorative plaster: how to do it yourself?

What are decorative plaster rollers? Varieties and scope. How to work with them correctly?

Rollers for decorative wall plaster

The use of decorative plaster as a finishing material has long ceased to be something exotic. Its use in the design of the interiors of apartments or public institutions, as well as the facades of houses, allows you to get a strong and durable coating that is resistant to damage and wear.

Additional advantages include the absence of seams and joints on the surface, which significantly increases the aesthetic value of the finishing material, and one can talk endlessly about decorative qualities. Rollers for decorative plaster, which are best suited for working with this finishing material, will help to translate the idea into reality.

Varieties of rollers.

A smooth painted wall is good, but an interior with such elements does not look original and does not represent any artistic value. Applying plaster with a roller can solve this problem, and depending on the type of tool itself, you can get amazing volumetric effects on the surface of the walls. In addition, the use of a roller can increase productivity several times: in a short time, you can process the maximum area.

The roller for textured plaster is a cylinder fixed on the handle, a special coating is applied to the surface of the roller, due to the texture of which the necessary relief is created on the decorative coating.

Before choosing a tool, you should determine which decorative plaster is applied with a roller, because in addition to it, craftsmen use spatulas, brushes, etc. First of all, these are acrylic structural plasters for facade and interior work, fine and Venetian - for rooms. The granules that make up the material should be small in size so that the decorative effect when using the roller is maximum.

All rollers for decorative plaster are conventionally divided into two categories:

• by the type of material of the working surface of the tool itself;
• according to the type of pattern left on the surface.

Types of rollers according to the material of the working surface.

The working surface of the tool directly affects the final result. Today, there are several groups of rollers that are used when applying decorative plaster.

1. Rubber. On the roller of such a tool, various protrusions or recesses are located, due to which the necessary effect is created on the surface of the wall. Such a device is well suited for imitating a clear texture: masonry, patterns, etc. Rubber rollers are most often used by experienced craftsmen, since they require certain skills in working with plaster.
2. Wooden. The tool is similar in purpose to rubber, but it is easier to work with it, because when applied, the plaster sticks less to its surface. In addition, wood is an environmentally friendly material and will not enter into a chemical reaction with the composition (this can be useful when decorating a children's room). Over time, the wooden roller can swell from constant contact with water, so after each use it should be thoroughly cleaned and dried.
3. Plastic. Cheap analogue of rubber. With use, deformation of its surface and the appearance of cracks are possible, which can adversely affect the final result.
4. Leather. With their help, the decorative coating acquires the effect of marble. Leather rollers are indispensable for applying Venetian plaster on the walls with your own hands. For work, a roller made of genuine leather is better suited, capable of providing the highest quality result, in addition to everything, it will last much longer than artificial analogues.
5. Pile. The fur coat of such a roller is made of artificial (acrylic, polyamide) or natural fur of various lengths. The length of the pile affects the relief, the smaller it is, the smoother the surface will be. The quality of the tool is very important, when buying, you should pay attention to the durability of the pile, if it “climbs”, then all the hairs that have fallen out will settle on the plaster and ruin the final coating.

In addition to these types, foam, fabric and foam rubber rollers are used, which create various roughnesses on the walls. For example, the use of the latter creates the effect of bursting bubbles or craters on the plaster.

Important: Pressure on the roller when applying a textured coating is not welcome. The lower the pressing force, the more pronounced the effect. Movements when working with the tool should be smooth, sliding in the direction from top to bottom and as continuous as possible.

Depending on the desired result and the surface area on which the textured plaster is applied, the appropriate width of the tool is selected.

Types of rollers according to the type of final drawing.

Depending on the desired pattern or texture, the following types of decorative plaster rollers are used, even with your own hands you can create unique decorative elements with their help.

1. Textured rollers. Such tools are able to imitate a variety of materials on decorative plaster: fur, marble, textiles, wood, etc.

The relief on the plane of the wall is achieved due to the corresponding surface of the roller itself. For example, in order to obtain decorative plaster with a “fur coat” effect, it must be applied with a long-haired roller.

A surface that imitates natural stone is obtained by using a roller with a looped pattern in the form of “lugs”.

Textured rollers for decorative plaster are indispensable for obtaining the effect of marble; rollers with leather or fabric nozzles are used for this. In order for the texture to be as realistic as possible, it is important to move the tool evenly, without lifting it off the surface for as long as possible.

The composition of decorative plaster is applied directly to the wall with a roller, the texture of the surface is formed simultaneously with the application of the plaster.

When using such tools, it is important to remember that:

• The wider the plaster roller, the easier it is to get the desired effect.
• The convex pattern on the surface of the wall is achieved using a roller with recesses, and the depressed effect, on the contrary, is achieved due to the relief protruding on the roller.
• It is better to use a roller on a slightly dried coating so that the effect does not “float”.

2. Structural rollers. Unlike the previous type, these tools are used to obtain a repeating complex pattern or ornament on an already applied finishing material.

Such rollers are most often used when applying a liquid composition over an already finished surface, painted or plastered. This is due to the fact that a pronounced relief on the nozzle when rolling the roller over a thick layer of plaster can lead to uneven settling of the material in the cells of the tool, and as a result, the formation of an uneven final coating.

To avoid this, you can:

• Use a roller with a slightly pronounced relief;
• Dry the plastered surface for 20 minutes, and only then, from top to bottom, observing the uniformity of speed, pressure and direction, roll the roller along the wall.

Important: When applying decorative compositions using a structural roller, it is important to ensure that each time the tool passes exactly next to the previous pass. It is not worth retreating and rolling the roller with an overlap, this will negatively affect the result.

Independent production of rollers.

It is not always possible to find a suitable relief roller for plaster in the store, but in this case you can make it yourself. The pattern applied with such a tool will be unique, which will allow you to create an exclusive interior.

To imitate the texture of wood, an ordinary rubber roller is wrapped with a bundle of the same material (for reliability, it is better to put it on glue), the turns can be made of different thicknesses and directions, due to which the “wooden” surface will look very realistic. You can do the same with a plastic roller by wrapping it with a narrow strip of dense fabric.

You can get a textile ornament on the wall by using a smooth roller pasted over with a fabric of the appropriate texture.

Even a simple roller, arbitrarily wrapped with a rope, a tourniquet or polyethylene, can create unique ornaments on the wall and unique textures on the plastered surface.

Widespread use can be found for foam rollers, with patterns or grooves of various degrees of curvature carved on them, so you can achieve both the effect of brickwork and just an interesting vertical ornament. But it is worth remembering that the foam can somewhat deform the final pattern, so using such a roller is very careful.

Patterning technique.

So, the choice in favor of the material for finishing the walls is made - decorative plaster. The technology of applying it with a texture roller is available even to a novice master, but it requires certain skills and accuracy:

• The roller is dipped into a decorative composition, poured into a special cuvette, the excess plaster is squeezed out.
• It is necessary to apply the composition on the wall from top to bottom (in the future this direction cannot be changed), trying not to tear the roller from the surface to the end of the strip - the quality of the final work depends on this. The pressure and rolling speed of the roller must be uniform.
• Each strip is applied close to the previous one without gaps and overlaps, it is worth applying the plaster immediately to the entire wall so that the borders are not visible.
• Decorative plaster is applied in only one layer, so it is important to ensure that it is of the same thickness.
• If the texture after application seems rough, then you can soften the effect with a brush.
• When using a structural roller, you should wait a bit for the surface to dry, but the longer the plaster dries, the more it loses its plasticity.
• By changing the degree of pressing the roller, you can achieve various effects on the wall surface, this technique is useful for emphasizing individual decorative elements.

Important: Rollers for decorative plaster with a large relief visually reduce and narrow the space, this must be taken into account when finishing small rooms with low ceilings.

In addition to interior decoration, decorative coating is used for outdoor work. Especially popular as a reliable, simple and beautiful finish is decorative facade plaster under a fur coat. For its application with a roller does not require any special skills.

Question price.

The cost of applying textured plaster (per square meter) depends on:

• Type of coating, the most expensive - Venetian and silicone.
• material consumption. On average, the consumption is 1 kg / m2, if the plaster is finely dispersed, then the consumption decreases.

You can buy material at any hardware store, prices vary greatly depending on the type of composition and its manufacturer.

The most expensive coating (per sq. m.) is Venetian decorative plaster, which is due to:

• application technology in several layers;
• high requirements for the quality of the base;
• the complexity of working with the composition.

If desired, you can make a decorative composition yourself or order it from the builders. In this case, the price per m2 of the finished coating will be much less.

The price range of rollers for decorative plaster is also wide, the better the material for the roller is used, the more expensive the tool. A rubber or wooden embossed plaster roller is the most expensive, but its service life is much longer than that of plastic or foam counterparts.

Rollers for decorative wall plaster, All about plaster, its varieties and features

Which roller is best to use and with which plaster. Maybe it's textured with a pile or a structural rubber roller. What other rollers are and

Roller for decorative plaster: the choice of the necessary modification and technology of use

How is decorative plastering done with a roller, what are such rollers and are there any other effective ways to apply the necessary texture to the surface to be plastered?

We will consider the answers to these questions in this article.

Factory roller and DIY modifications

Main characteristics

Rubber roller and a fragment of decorative plaster applied with its use

A structural decorative plaster roll is a variation of the traditional pressure roll.

However, if a traditional painting tool is designed to apply an even layer of paint, then its structural modification is designed to perform slightly different tasks. Due to the pressure on the surface to be treated, the structural, or as it is also called the textured roller, gives the surface of the plaster one or another relief - a three-dimensional texture.

A wide range of these devices is currently on the market. Among the wide range of structural rollers, you will certainly be able to choose the modification with which the interior decoration will provide the best result.

Selecting the required modification

Replacement head for structure roller

Textured rollers for decorative plaster are of two main types:

• soft (usually made of polyethylene or foam rubber);
• rigid (made of rubber and elastic plastic).

Regardless of the variety, these tools "work" like a stamp. When pressing on the surface to be treated, imprints of the roller pattern remain on the plaster. Thus, by passing the tool along the newly laid plaster in one direction or another, you can get the desired texture.

So, what to choose, structural rollers for decorative plaster with a soft or hard working part?

The rigid structural roll is the optimal solution for handling more viscous formulations. That is, using such a tool, you can work both on freshly laid and partially dried plaster. In addition, using this tool, complex relief compositions can be applied to the surface.

Despite the fact that the price of a hard roller is slightly higher than the cost of soft counterparts, this difference is fully justified. Firstly, a tool with a hard surface will last more than one year, of course, if it is properly cared for. And secondly, the range of textures of rigid rollers is an order of magnitude wider.

The rubber embossed roller is used to form a coating with a highly embossed, clearly defined structure. If necessary, a thread roller can be used as an alternative to the relief tool. But, unfortunately, the fleecy working part of such a tool is quickly clogged with plaster and needs to be washed, which greatly complicates the finishing work.

Pressure and structural rollers cost twice as much as equivalent painting modifications. Therefore, when choosing one or another model, it is necessary to ensure that there are no cracks and delaminations on the rubber layer. Moreover, the rubber with the applied relief must be glued with high quality so that the roller does not fall into pieces during operation.

Pressure and structural relief rollers for decorative plaster, with rare exceptions, are produced with thick 8 mm clasp. This is due to the fact that significant pressure is exerted on the working part of the tool and the more fragile structure will simply fall apart.

A significant advantage is the presence of a rubberized handle. Working with a conventional paint roller, this advantage cannot be fully appreciated, but if you have a pressure roller in your hands all day, you will definitely feel the convenience.

Soft fleecy roller in the paint bath

Foam rubber or polyethylene rollers for applying decorative plaster are a more affordable modification of the tool. But the purchase of such products is advisable only if the plaster is done in one copy, since if you work with a foam rubber roller constantly, it quickly clogs, requires periodic rinsing and does not guarantee the same intensity of pressure as when using a rubberized tool.

The main field of application of foam rubber rollers is the application of fine-grained coatings on plaster surfaces with various color and light transitions.

Technology of use

In the photo - an assortment of rollers in hardware stores

Applying a decorative plaster coat with a roller is carried out as follows:

• We prepare the base. We remove all contaminants and significant relief from the surface. Next, close up all the cavities and level the work surface with putty. After the leveling layer has dried, cover the base with a primer.

Important: Putty must be selected according to the type of surface to be leveled. You can learn more about the selection and use of leveling putties for walls in the relevant articles on our portal.

• We prepare a modeling plaster solution with our own hands. In order to start making a plaster mortar, we use a galvanized or plastic bucket and a low-speed drill with a special nozzle.

We open the package with the mixture and prepare the solution in strict accordance with the manufacturer's instructions. The dry mixture is thoroughly mixed with water until a homogeneous consistency and complete absence of lumps.

Tip: If splatter is thrown around the bucket when stirring at low speed, try switching the reverse so that the rotation is counterclockwise.

• After the solution is ready, add color to it and again mix everything thoroughly until a single-color mass is formed in the container. After that, let the solution stand for 5-10 minutes, and proceed to the application.
• Pour a small amount of the solution into the paint bath and dip a hard roller into it. Then we roll the roller over the treated coating. After that, we again dip the roller into the bath and repeat the procedure.

We apply the lines with a roller in one direction so that the stripes are invisible and so that the transitions do not stand out. Stripes can be applied both vertically and horizontally and diagonally, the main thing is that the result you are completely satisfied with.

In the photo - Venetian plaster applied with a tool of our own production

Is it possible to simplify the finishing work? Of course, you can, but for this you need to buy a ready-made mixture in a special sealed container. In this case, you do not have to stir the solution, pour it into a paint bath, because everything is ready!

A special bucket, in which the finished plaster is sold, has an oval shape and is adapted for immersing the roller. An important advantage of using ready-made solutions is the absence of the need to use personal safety equipment.

If, when working with dry mixes, it is necessary to use a respirator and wired goggles, in the case of ready-made plasters, there is no such need.

Important: After application, the structural roller, regardless of what material it is made of, must be thoroughly rinsed in running water and dried.

Applying texture with a comb

But what if there is no such tool? Do-it-yourself decorative plaster rollers can be easily made, but you can also use a hard brush and brush it in different directions. In addition, to give the surface of a particular texture, you can use various improvised means, up to a crumpled plastic bag.

However, you can read about the various methods of applying decorative finishing plasters in the relevant articles on our portal.

Now you know what the instructions for using structural rollers are, and what are the features of their choice. It remains to purchase a plaster mixture and the appropriate tool and get to work.

Roller for decorative plaster: textured products for applying compositions, videos and photos

Roller for decorative plaster: textured products for applying compositions, videos and photos

How to choose a roller for decorative plaster

Rollers for decorative plaster will help to add a stylish design to the room and make it unusual. It is amazing that such an affordable and familiar wall leveling tool has become a full-fledged tool for decorative finishing. The secret of the transformation lies in textured rollers, which allow you to create a figured print on the wall that imitates various types of surfaces, for example, the texture of stone, wood, leather, a fur coat, etc.

With the help of figured rollers, you can easily create a picture on the wall

Varieties of rollers

For a long time, craftsmen have been working on walls with improvised means: sponges, a comb, a hard brush. Today, the assortment of construction tools for decoration allows you to find a roller with a ready-made relief that suits your design, which, after processing the plastered wall, turns it into real three-dimensional images. Variations of roller cylinder coatings:

• rubber;
• foam rubber;
• plastic;
• wood;
• silicone;
• the cloth;
• leather.

Before choosing a roller, you need to decide on the desired pattern on the wall

Tools with a soft surface, such as fur, create a “fur coat” effect on the plaster. Marble finishing is obtained with a fabric roller with a crinkled fabric, and a leather surface gives a finish similar to natural stone. As a rule, they work with such rollers when it is necessary to process a painted surface. Standard foam cylinders can be upgraded with twine, thread, and foam pieces to create natural patterns such as tree bark.

Features of structural plaster rollers

If you are interested in a more pronounced decor, then you can not do without hard-coated rollers. Their cost is an order of magnitude higher than conventional pressure ones, but this is due to their high aesthetic value. Plus, you can use them multiple times. The most productive will be rubber rollers, which can have a convex pattern to get a depressed pattern or slotted to form three-dimensional textures.

Since such an innovation for decorative plaster came from Western countries, it is in their stores that a variety of textures and patterns reigns: leaves, flowers, animals, birds, geometric shapes.

Works with a structural roller are carried out in two ways - first they apply plaster, wait for some fixing, after which they finish by layer or apply plaster to the wall (already filled with putty in one layer), dipping the roller into the composition. But, basically, the second method is used to carry out patterned coloring by creating prints with this rubber product.

Stages of wall plastering

In order for the plaster to last longer and not crack, it is necessary to pre-treat. To do this, the surface of the wall is cleaned of dirt, old wallpaper, dust and a primer is applied to it. Then, for leveling, they pass with putty. For puttying, spatulas with a size of 300 mm, 450 mm, 600 mm are used. Putty application should be uniform. And don't push too hard.

After the first layer of putty has dried, it is necessary to apply a second one using a 600 mm spatula. Putty must be applied and smoothed in two mutually perpendicular directions. Then you can proceed to the decoration process, which consists of the following steps:

1. Dry plaster is mixed with water, bringing to a homogeneous consistency.
2. Then they apply the mixture to the wall with a layer of 2-4 mm in order to move on to creating a decor, or more dense if it is also necessary to level the surface. Smooth out with a spatula.
3. They give ten minutes for the composition to thicken, and they begin to pass the textured roller from top to bottom, forming a pattern. It is more convenient to work in pairs, when the first person is applying plaster, and the second creates a relief, for example, a “fur coat”.
4. The subsequent processing of the wall with paint is carried out after 48 hours, as the plaster finally dries. If it is necessary to paint over the entire wall, then a roller with a long nap is bought, and to add color only to the protruding parts, they take a tool with a short nap.

Principles of accurate drawing

Using rollers for decorative plaster, you must follow a few rules:

1. The roller is not pressed strongly against the wall, the movement should be smooth and unhurried.
2. The application of the second ink path begins where the border of the first pattern passes, without overlap.
3. At the ceiling, the roller needs to be pressed up a little, but keep a low pressing force further.
4. If the pattern is too embossed, it can be smoothed out with a wet sanding mesh.

How to create a "fur coat" surface

A “fur coat” wall means that plaster is sprayed onto the surface with a broom, brush, or a special machine. "Fur coat" is especially popular for the facade surface, but it will also look interesting indoors. The modern version of creating a fur coat includes the use of a textured roller, which allows you to make the layer uniform and presentable.

Facade processing under the "fur coat" is carried out in the same way as in the room. First putty is applied, plastered and carried out over the plastered layer with a pile roller. If an error occurs or you see that the plaster is uneven, you should remove the excess with a spatula. It is impossible to take breaks in the process of creating a “fur coat”, otherwise the composition will have time to dry, and there will be too noticeable a joint at the edges.

The use of structural rollers will allow you to decorate the wall as well as any repair specialist. Decorative plaster has long outgrown its main purpose (wall leveling) and is a great way to create exclusive interiors, and even in ethnic style.

Rollers for decorative plaster - types and application technique

Decorative plaster rollers are made from hard materials (plastic and rubber), used to create a relief pattern, and soft-coated tools (foam rubber or fabric) form a stone-like layer.

Varieties of textured rollers for decorative wall plaster

In the old days, plaster was used only as a base for painting, and the direct decoration of the walls was done with paint. However, progress does not stand still, and today it has become fashionable to cover walls with decorative plaster. At the same time, the process of finishing the surface of such plaster is not complicated. It is possible to make a stylish design for the room, adding unusualness to it with the help of special rollers for decorative plaster. It is interesting that such an affordable and popular tool for leveling walls has become a full-fledged tool for performing decorative wall decoration. The secret of such a device lies in textured rollers, which allow you to make curly prints on the walls, imitating various types of surfaces and textures, for example, the texture of kosha, wood, stone, and even the effect of a “fur coat”.

Decorative plaster is widely used for interior decoration. For many years it has been used both for external work and for internal work. It has wear-resistant qualities, it is waterproof, and after application to the walls it forms a reliable and durable layer.

Thanks to this type of finishing material, various design solutions can be used for the home, giving the room texture and unusual color scheme. Various patterns are applied to the surface using special rollers for decorative plastering. If you carefully study the technology of work, then without much difficulty you can do such a finish with your own hands, without turning to expensive specialists for help.

Among the additional advantages, one can single out the absence of joints and seams on the surface, and this, in turn, greatly increases the aesthetic value of the finishing material. You can also note the presence of many decorative qualities. To translate the idea into reality, you should better study all the existing types of rollers for decorative plaster, which are best suited for working with such a finishing material for a particular case.

Features of a structural roller for decorative plaster

If the owners of a house or premises are interested in more pronounced wall decoration, then a hard-coated roller is indispensable. Such rollers cost an order of magnitude higher than conventional pressure rollers, due to the higher aesthetic value compared to conventional tools. In addition, they can be used multiple times. The most productive are rubber rollers with a convex pattern for indented patterns or slotted rollers that form three-dimensional textures.

Since such an innovation for finishing decorative plaster came to the domestic market from Western countries, this also causes a variety of their patterns and textures in the construction markets. You can find textures in the form of birds, animals, flowers, leaves and geometric shapes.

Work with structural rollers is carried out in two ways:

1. first of all, they apply plaster and wait for it to harden for some time, and then finish the layer over the layer;
2. dipping the roller into the composition, apply plaster on the wall, which is already framed with putty in one layer.

For the implementation of patterned coloring, the second method is mainly used by creating various prints with such a rubber product.

Varieties of textured rollers

First of all, rollers differ from other tools designed to give texture to plaster by their purpose. Decorative swabs, sponges, stamps and applicators are intended for spot application or for decorating small areas. With the help of a structural roller for decorative plaster, it will be possible to process surfaces of a large area, increasing the productivity of work several times.

All existing types of rollers can be divided into two categories: according to the type of material used in the manufacture of their working surface, and according to the pattern left on the plaster.

Types of rollers in accordance with the material of the working surface

Structural foam rollers for decorative plaster

For a structural roller, foam rubber must have deep pores of various diameters, leaving traces on the plaster according to their size in the form of lunar craters or bursting bubbles. You do not need to press on the roller with great force, otherwise the plaster will lay down in an ordinary even layer without relief. Particular attention should be paid to the following points:

• The plaster for decoration should be finely dispersed, since the relief rollers cannot cope with the stretching of large particles that come across, as a result of which the effect of the desired surface is smeared.
• It is not permissible to work with plaster containing solvents in its composition, since such substances will easily dissolve foam rubber, fragments of which will remain on the surface of the walls, creating an ugly appearance.

Styrofoam textured rollers for decorative plaster

This type is a cheaper analogue of a rubber roller. With it, you can also apply various types of plaster, creating many patterns, but keep in mind that such rollers do not last very long. Styrofoam cannot be called a durable material, as it is prone to deformation. During operation, you will have to replace such a roller with a new one several times. In addition, patterns on foam have a tendency to flatten, resulting in a pattern that is not as expected. Alternatively, it is acceptable to use a foam roller with a flat surface, but, unfortunately, it will not give the plaster an unusual texture.

Rubber textured rollers for decorative plaster

This version of the tool is the most preferred. The rubber roller on its flat surface has recesses and protrusions that create a pattern. This tool is suitable for creating clearly defined textures, for example, murals, brickwork and other patterns of various types. There are times when plaster can stick to the surface of the roller. In order to avoid this, it is recommended to wet the tool in a soapy solution, but one way or another, it is not known what manipulations this may affect the final wall covering.

Leather textured rollers for decorative plaster

Thanks to the leather-surfaced roller, you can create one of the most popular effects, namely the effect of a marble surface. The skin, due to its elasticity, leaves beautiful stains like on a marble coating. Such a roller is most often used when working with Venetian plaster. Be sure to choose your roller responsibly and purchase a roller coated with real leather, as artificial material can be disappointing. Low-quality leather at best will not leave any traces, just sliding on the plaster, and at worst, when dissolved, it will ruin expensive plaster.

Wooden textured rollers for decorative plaster

A textured wooden roller is the simplest, but it has all the advantages of a rubber analogue and, moreover, additionally ensures the environmental friendliness of the coating, since the wooden tool will not spontaneously react chemically with the components of the plaster. For this reason, wooden rollers are often used to decorate walls for children's rooms.

However, the wood also absorbs water from the plaster mix and can swell as a result. This makes the resulting image less clear. This can be corrected by drying the roller, after which further work can be done.

Plastic textured rollers for decorative plaster

A plastic textured roller is considered a cheaper analogue of a rubber roller. With it, you can create a wide variety of patterns and textures. In the construction markets, you can find rollers with holes and holes to form bulges on the wall. This option is characterized by non-triviality. The disadvantage of this material is that the plastic deforms after some time, becoming covered with chips and cracks. This, of course, is not reflected in the coating in the best way.

Fleecy textured rollers for decorative plaster

Rollers of this kind create a "fur" effect on the walls. The material used for the pile of the roller is very diverse, ranging from natural furs to polyamide threads. The pile has a length of 2-25 millimeters. The longer the pile, the more “hairy” the surface of the walls will turn out.

When buying a fleecy roller, you must be careful to carefully check how well the pile is fixed to the rotating cylinder, since a poor quality roller can ruin the surface of the walls, leaving peeling fibers on it.

Varieties of curly rollers according to the resulting final invoice

Rollers can have a completely different texture, imitating textiles, wood, fur, marble, brickwork and even more complex patterns, such as waves, oriental-style ornaments, braids and others. Thanks to each of them, you can create a specific surface. The deeper the pattern is cut on the roller, the richer and more pronounced the final texture is.

It should be noted that it is necessary to select for each room its own texture of the pattern on the wall, and therefore its own type of textured roller. So, for example, in the working area of ​​​​the kitchen or in the hallway, an imitation of brickwork will look good, which will be completely inappropriate for the bedroom. Therefore, it is better to immediately purchase a roller that has interchangeable nozzles in the kit.

Creating a roller for decorative plaster with your own hands

Although a large assortment of factory-made textured rollers is presented in hardware stores, nevertheless, many still prefer to make such a tool on their own. There are several reasons for this: the desire to save on financial resources, which are already spent on repairs in a considerable amount, or if you cannot find a roller with the desired pattern on sale, especially if you want to create an individuality in the interior by applying an exclusive author's texture to the walls.

Regardless of the reasons, it is possible to make a textured roller with your own hands using one of the existing methods:

1. To imitate a brick treasure, a foam roller serves as the basis. With the help of an ordinary clerical knife, recesses shaped like bricks are cut out on it. In this case, it will be a mistake to cut the bricks themselves, since after smoothing with a roller they will not be convex, but simply pressed into the wall, having lost the effect of realism.
2. There is no better way to reproduce a textile fabric on a wall than using the textile itself. In this case, a simple foam roller is wrapped with a strip of canvas fabric of a rough texture and secured with threads.
3. To imitate a marble surface, a plastic roller sheathed with a piece of genuine leather is ideal. Moreover, it is desirable to sew the skin casually and with folds.
4. To give the surface of the walls the effect of a board made of natural wood, a plastic roller must be wrapped with a narrow strip of textile or sheathed with a crinkled cloth.
5. To get a specific pattern, you need to cut it on the surface of the roller, which plays an auxiliary role. For these purposes, a foam rubber or foam roller is best suited. It should be borne in mind that the foam rubber is required hard.

In some cases, kitchen utensils, such as a rolling pin, and even massage rollers can be used as a structural roller.

Step-by-step technique for decorative wall plastering

Before applying decorative plaster, it is necessary to prepare the walls. In order for the plaster material to last longer and crack, pre-treatment of the walls is performed. To do this, the entire surface of the walls is cleaned of dirt, dust and old wallpaper, and a primer is applied on top. Then, for even greater alignment of the walls, putty is performed. For this, spatulas with sizes of 40, 45 and 60 centimeters are used. The putty is applied as evenly as possible, without pressing it strongly into the walls.

After the first layer of putty has dried, the second layer is applied with a 60 cm spatula. Putty is applied and smoothed in two directions, mutually perpendicular to each other. Finally, after preparation, the process of decorating the walls begins, consisting of the following several stages:

1. Dry plaster is mixed with water until a homogeneous consistency is achieved.
2. Next, the mixture is applied to the walls with a layer of 2-4 millimeters to move on to decorating. If it is necessary to level the surface of the walls, then the layer is made dense. Everything is smoothed out with a spatula.
3. Next, you need to suspend work for about ten minutes to thicken the composition, and then pass the textured roller from top to bottom, forming a pattern. At the same time, it is desirable to work in pairs, so that one worker is engaged in applying the plaster, and the second creates the selected relief.
4. The subsequent processing of the walls with paint is carried out after 48 hours, that is, after the final drying of the plaster. If you plan to paint the entire wall, then you need to purchase a roller with a long nap, and in order to add color only to specific protruding elements, a short nap roller is used.

Rules for the accurate application of decorative plaster

When using textured rollers for decorative plaster, certain rules should be followed:

• You can not press the roller against the wall too much, the movements should be slow and smooth.
• Applying the second track of paint begins at the place where the border of the first strip passes, without overlapping.
• The roller in the area of ​​\u200b\u200bthe ceiling must be slightly pressed upwards, while maintaining the same pressing force further.
• Movements are made from the bottom up, while it is unacceptable to make chaotic movements, otherwise the structure of the picture will be indicated indistinctly. For the same reason, the strips carried by the roller should run close to each other, and not overlap.
• The first strips must be checked using the building level, otherwise they can be “filled up” in relation to the ceiling and floor.
• Work should be carried out taking into account the time for which the plaster dries. Even quite a bit dried plaster will become less plastic. It is permissible to apply decorative plaster in fragments, followed by working with a roller, after which it will be possible to proceed to the next section on the wall.
• Do not forget that the rollers wear out, and when carrying out long-term work with a structural roller, it is necessary to replace it periodically.
• If the pattern turned out to be very embossed, then it can be smoothed out using a wet sanding mesh.
• The process of finishing work can be facilitated if you purchase a ready-made mixture in special sealed containers. Then you do not have to waste time and energy on stirring the solution and pouring it into the paint bath.
• The bucket, in which the finished plaster is sold, has the shape of an oval, thereby adapted for unhindered immersion of the roller. An important advantage of using a ready-made solution is that there is no need to use means for personal safety. If when working with dry mixes there is a need to use a respirator and goggles, then when working with ready-made plaster, such a need does not arise.

It is important to note that after use, the structural roller, regardless of the material of manufacture, must be thoroughly rinsed under running water and dried.

Creating a “fur coat” effect using decorative plaster and a textured roller

Under the wall with the effect of a "fur coat" is meant spraying plaster onto the surface of the walls with a brush, broom or a special machine. the most popular "fur coat" for facade surfaces, but it will also look interesting indoors. The modern method of creating the “fur coat” effect is to use a textured roller that allows you to apply a uniform layer, making the walls look presentable.

Facade processing under the "fur coat" is carried out in the same way as in the premises. First of all, putty is applied, plastering is performed and a decorative roller with a pile is carried out over the plaster layer. If a mistake was made during the work or the surface is uneven, then you can remove the excess with a spatula. It is not allowed to take breaks when creating the “fur coat” effect, because otherwise the composition will dry out, leaving very noticeable joints at the edges.

The technique of plugging plaster with a sponge

In addition to rollers, a sponge is also used for decorative wall decoration, which allows you to achieve a spotted soft pattern. The sponge can be synthetic or marine. The image obtained by a synthetic sponge is much different from the pattern performed by a natural one, since the first sponge has an ordered pore structure. This makes the drawing correct. A natural sponge has larger pores arranged in a chaotic manner, which makes the pattern itself also disordered. To achieve a more unique image, some experts advise cutting such a sponge in half, applying the solution with its inside. When working, you need to touch the base with light blotting movements.

Technique for plugging decorative plaster with a cloth

Another unusual way to implement decorative plaster is plugging with a cloth. As a rule, non-fibrous, highly absorbent materials are used. In this case, the drawing can be applied in two ways: with a fabric tourniquet or flaps. The first way you can create a soft unique pattern, and the second is similar to surface treatment with a sponge. There is also some combination of a tampon and tissue in the form of special tampon rollers. Such a roller does not create any differences for surface treatment, but it is much more convenient and faster to work with it. Also on sale in specialized stores you can find design rollers that form complex and beautiful patterns.

To create an orange peel effect, you can use a sponge roller with a medium grit. To achieve the "country" effect, a honeycomb roller is used. If you want to leave marks with a brush, it is carried out over the applied plaster. In this case, the brush should be Spanish or a short pile.

The cost of applying decorative plaster with a roller

The price for applying textured plaster per square meter depends on the following factors:

• type of coating, for example, the most expensive of them are silicone and Venetian;
• from the volume of consumable material, which averages 1 kilogram per square meter, and in the case of fine plaster, the consumption will be less.

Materials for decorative plastering can be purchased at any hardware store. Prices for the material are very different and depend on the manufacturer and the composition of the product. The most expensive is decorative Venetian plaster. Its high cost is due to the complexity of working with the composition, strict requirements for the quality of the base, as well as the technique of applying the composition in several layers. If there is a desire, then such a composition can be made independently or ordered from experienced builders. This will significantly reduce the cost of coating per square meter.

The price variation of textured rollers for decorative plaster is also wide. The higher the quality of the material used in the manufacture of the roller, the tool costs more. A wooden or rubber plaster roller is more expensive than others, but it has the longest service life compared to foam or plastic counterparts.

Conclusion

Structural rollers are tools with a simple design, but with a wide range of possibilities. With it, mono imitate skin, fur, stone, wood, and even animal paw prints. To apply textured plaster, you just need to pick up a roller with the required texture and start mastering the application technique. When I give it, it is desirable to give preference to a high-quality tool, observing the appropriate wall finishing technology.

If you follow a few recommendations, this simple tool can become indispensable for creating the interior of your dreams. After all, decorative plaster has long passed from its main function of leveling walls into a means for decorating them. The textured roller for decorating with plaster consists of a cylinder, its cover and a handle. The cylinder itself has a base, which can be made of metal, rubber or plastic. The cover is also made from various materials, such as fabric, leather or foam rubber. The irregularities on their surface will be reflected in the wall covering with various shapes and images. The plaster is applied using a structural roller on pre-treated walls with movements from the bottom up. When working, it is important to remember that you can not put pressure on the roller in order to get a clear texture of the picture. After the surfaces have dried, in some cases, individual elements are covered with acrylic paint, for example, bulges or depressions are painted over with golden or silver paint in accordance with the tone prevailing in the interior of the room.

Textured rollers for decorative plaster

It is possible to make a stylish design for the room, adding unusualness to it with the help of special rollers for decorative plaster.

In the old days, plaster was used only as a base for painting, and the direct decoration of the walls was done with paint. However, progress does not stand still, and today it has become fashionable to cover walls with decorative plaster. At the same time, the process of finishing the surface of such plaster is not complicated. It is possible to make a stylish design for the room, adding unusualness to it with the help of special rollers for decorative plaster. It is interesting that such an affordable and popular tool for leveling walls has become a full-fledged tool for performing decorative wall decoration. The secret of such a device lies in textured rollers, which allow you to make curly prints on the walls, imitating various types of surfaces and textures, for example, the texture of kosha, wood, stone, and even the effect of a “fur coat”.

Decorative plaster is widely used for interior decoration. For many years it has been used both for external work and for internal work. It has wear-resistant qualities, it is waterproof, and after application to the walls it forms a reliable and durable layer.

Thanks to this type of finishing material, various design solutions can be used for the home, giving the room texture and unusual color scheme. Various patterns are applied to the surface using special rollers for decorative plastering. If you carefully study the technology of work, then without much difficulty you can do such a finish with your own hands, without turning to expensive specialists for help.

Among the additional advantages, one can single out the absence of joints and seams on the surface, and this, in turn, greatly increases the aesthetic value of the finishing material. You can also note the presence of many decorative qualities. To translate the idea into reality, you should better study all the existing types of rollers for decorative plaster, which are best suited for working with such a finishing material for a particular case.

Features of a structural roller for decorative plaster

If the owners of a house or premises are interested in more pronounced wall decoration, then a hard-coated roller is indispensable. Such rollers cost an order of magnitude higher than conventional pressure rollers, due to the higher aesthetic value compared to conventional tools. In addition, they can be used multiple times. The most productive are rubber rollers with a convex pattern for indented patterns or slotted rollers that form three-dimensional textures.

Since such an innovation for finishing decorative plaster came to the domestic market from Western countries, this also causes a variety of their patterns and textures in the construction markets. You can find textures in the form of birds, animals, flowers, leaves and geometric shapes.

Work with structural rollers is carried out in two ways:

1. first of all, they apply plaster and wait for it to harden for some time, and then finish the layer over the layer;
2. dipping the roller into the composition, apply plaster on the wall, which is already framed with putty in one layer.

For the implementation of patterned coloring, the second method is mainly used by creating various prints with such a rubber product.

Varieties of textured rollers

First of all, rollers differ from other tools designed to give texture to plaster by their purpose. Decorative swabs, sponges, stamps and applicators are intended for spot application or for decorating small areas. With the help of a structural roller for decorative plaster, it will be possible to process surfaces of a large area, increasing the productivity of work several times.

All existing types of rollers can be divided into two categories: according to the type of material used in the manufacture of their working surface, and according to the pattern left on the plaster.

Types of rollers in accordance with the material of the working surface

Structural foam rollers for decorative plaster

For a structural roller, foam rubber must have deep pores of various diameters, leaving traces on the plaster according to their size in the form of lunar craters or bursting bubbles. You do not need to press on the roller with great force, otherwise the plaster will lay down in an ordinary even layer without relief. Particular attention should be paid to the following points:

• The plaster for decoration should be finely dispersed, since the relief rollers cannot cope with the stretching of large particles that come across, as a result of which the effect of the desired surface is smeared.
• It is not permissible to work with plaster containing solvents in its composition, since such substances will easily dissolve foam rubber, fragments of which will remain on the surface of the walls, creating an ugly appearance.

Styrofoam textured rollers for decorative plaster

This type is a cheaper analogue of a rubber roller. With it, you can also apply various types of plaster, creating many patterns, but keep in mind that such rollers do not last very long. Styrofoam cannot be called a durable material, as it is prone to deformation. During operation, you will have to replace such a roller with a new one several times. In addition, patterns on foam have a tendency to flatten, resulting in a pattern that is not as expected. Alternatively, it is acceptable to use a foam roller with a flat surface, but, unfortunately, it will not give the plaster an unusual texture.

This version of the tool is the most preferred. The rubber roller on its flat surface has recesses and protrusions that create a pattern. This tool is suitable for creating clearly defined textures, for example, murals, brickwork and other patterns of various types. There are times when plaster can stick to the surface of the roller. In order to avoid this, it is recommended to wet the tool in a soapy solution, but one way or another, it is not known what manipulations this may affect the final wall covering.

Leather textured rollers for decorative plaster

Thanks to the leather-surfaced roller, you can create one of the most popular effects, namely the effect of a marble surface. The skin, due to its elasticity, leaves beautiful stains like on a marble coating. Such a roller is most often used when working with Venetian plaster. Be sure to choose your roller responsibly and purchase a roller coated with real leather, as artificial material can be disappointing. Low-quality leather at best will not leave any marks, just sliding on the plaster, and at worst, dissolving, ruining expensive plaster.

Wooden textured rollers for decorative plaster

A textured wooden roller is the simplest, but it has all the advantages of a rubber analogue and, moreover, additionally ensures the environmental friendliness of the coating, since the wooden tool will not spontaneously react chemically with the components of the plaster. For this reason, wooden rollers are often used to decorate walls for children's rooms.

However, the wood also absorbs water from the plaster mix and can swell as a result. This makes the resulting image less clear. This can be corrected by drying the roller, after which further work can be done.

Plastic textured rollers for decorative plaster

A plastic textured roller is considered a cheaper analogue of a rubber roller. With it, you can create a wide variety of patterns and textures. In the construction markets, you can find rollers with holes and holes to form bulges on the wall. This option is characterized by non-triviality. The disadvantage of this material is that the plastic deforms after some time, becoming covered with chips and cracks. This, of course, is not reflected in the coating in the best way.

Rollers of this kind create a "fur" effect on the walls. The material used for the pile of the roller is very diverse, ranging from natural furs to polyamide threads. The pile has a length of 2-25 millimeters. The longer the pile, the more “hairy” the surface of the walls will turn out.

When buying a fleecy roller, you must be careful to carefully check how well the pile is fixed to the rotating cylinder, since a poor quality roller can ruin the surface of the walls, leaving peeling fibers on it.

Varieties of curly rollers according to the resulting final invoice

Rollers can have a completely different texture, imitating textiles, wood, fur, marble, brickwork and even more complex patterns, such as waves, oriental-style ornaments, braids and others. Thanks to each of them, you can create a specific surface. The deeper the pattern is cut on the roller, the richer and more pronounced the final texture is.

It should be noted that it is necessary to select for each room its own texture of the pattern on the wall, and therefore its own type of textured roller. So, for example, in the working area of ​​​​the kitchen or in the hallway, an imitation of brickwork will look good, which will be completely inappropriate for the bedroom. Therefore, it is better to immediately purchase a roller that has interchangeable nozzles in the kit.

Creating a roller for decorative plaster with your own hands

Although a large assortment of factory-made textured rollers is presented in hardware stores, nevertheless, many still prefer to make such a tool on their own. There are several reasons for this: the desire to save on financial resources, which are already spent on repairs in a considerable amount, or if you cannot find a roller with the desired pattern on sale, especially if you want to create an individuality in the interior by applying an exclusive author's texture to the walls.

Regardless of the reasons, it is possible to make a textured roller with your own hands using one of the existing methods:

1. To imitate a brick treasure, a foam roller serves as the basis. With the help of an ordinary clerical knife, recesses shaped like bricks are cut out on it. In this case, it will be a mistake to cut the bricks themselves, since after smoothing with a roller they will not be convex, but simply pressed into the wall, having lost the effect of realism.
2. There is no better way to reproduce a textile fabric on a wall than using the textile itself. In this case, a simple foam roller is wrapped with a strip of canvas fabric of a rough texture and secured with threads.
3. To imitate a marble surface, a plastic roller sheathed with a piece of genuine leather is ideal. Moreover, it is desirable to sew the skin casually and with folds.
4. To give the surface of the walls the effect of a board made of natural wood, a plastic roller must be wrapped with a narrow strip of textile or sheathed with a crinkled cloth.
5. To get a specific pattern, you need to cut it on the surface of the roller, which plays an auxiliary role. For these purposes, a foam rubber or foam roller is best suited. It should be borne in mind that the foam rubber is required hard.

In some cases, kitchen utensils, such as a rolling pin, and even massage rollers can be used as a structural roller.

Step-by-step technique for decorative wall plastering

Before applying decorative plaster, it is necessary to prepare the walls. In order for the plaster material to last longer and crack, pre-treatment of the walls is performed. To do this, the entire surface of the walls is cleaned of dirt, dust and old wallpaper, and a primer is applied on top. Then, for even greater alignment of the walls, putty is performed. For this, spatulas with sizes of 40, 45 and 60 centimeters are used. The putty is applied as evenly as possible, without pressing it strongly into the walls.

After the first layer of putty has dried, the second layer is applied with a 60 cm spatula. Putty is applied and smoothed in two directions, mutually perpendicular to each other. Finally, after preparation, the process of decorating the walls begins, consisting of the following several stages:

1. Dry plaster is mixed with water until a homogeneous consistency is achieved.
2. Next, the mixture is applied to the walls with a layer of 2-4 millimeters to move on to decorating. If it is necessary to level the surface of the walls, then the layer is made dense. Everything is smoothed out with a spatula.
3. Next, you need to suspend work for about ten minutes to thicken the composition, and then pass the textured roller from top to bottom, forming a pattern. At the same time, it is desirable to work in pairs, so that one worker is engaged in applying the plaster, and the second creates the selected relief.
4. The subsequent processing of the walls with paint is carried out after 48 hours, that is, after the final drying of the plaster. If you plan to paint the entire wall, then you need to purchase a roller with a long nap, and in order to add color only to specific protruding elements, a short nap roller is used.

Rules for the accurate application of decorative plaster

When using textured rollers for decorative plaster, certain rules should be followed:

• You can not press the roller against the wall too much, the movements should be slow and smooth.
• Applying the second track of paint begins at the place where the border of the first strip passes, without overlapping.
• The roller in the area of ​​\u200b\u200bthe ceiling must be slightly pressed upwards, while maintaining the same pressing force further.
• Movements are made from the bottom up, while it is unacceptable to make chaotic movements, otherwise the structure of the picture will be indicated indistinctly. For the same reason, the strips carried by the roller should run close to each other, and not overlap.
• The first strips must be checked using the building level, otherwise they can be “filled up” in relation to the ceiling and floor.
• Work should be carried out taking into account the time for which the plaster dries. Even quite a bit dried plaster will become less plastic. It is permissible to apply decorative plaster in fragments, followed by working with a roller, after which it will be possible to proceed to the next section on the wall.
• Do not forget that the rollers wear out, and when carrying out long-term work with a structural roller, it is necessary to replace it periodically.
• If the pattern turned out to be very embossed, then it can be smoothed out using a wet sanding mesh.
• The process of finishing work can be facilitated if you purchase a ready-made mixture in special sealed containers. Then you do not have to waste time and energy on stirring the solution and pouring it into the paint bath.
• The bucket, in which the finished plaster is sold, has the shape of an oval, thereby adapted for unhindered immersion of the roller. An important advantage of using a ready-made solution is that there is no need to use means for personal safety. If when working with dry mixes there is a need to use a respirator and goggles, then when working with ready-made plaster, such a need does not arise.

It is important to note that after use, the structural roller, regardless of the material of manufacture, must be thoroughly rinsed under running water and dried.

Creating a “fur coat” effect using decorative plaster and a textured roller

Under the wall with the effect of a "fur coat" is meant spraying plaster onto the surface of the walls with a brush, broom or a special machine. the most popular "fur coat" for facade surfaces, but it will also look interesting indoors. The modern method of creating the “fur coat” effect is to use a textured roller that allows you to apply a uniform layer, making the walls look presentable.

Facade processing under the "fur coat" is carried out in the same way as in the premises. First of all, putty is applied, plastering is performed and a decorative roller with a pile is carried out over the plaster layer. If a mistake was made during the work or the surface is uneven, then you can remove the excess with a spatula. It is not allowed to take breaks when creating the “fur coat” effect, because otherwise the composition will dry out, leaving very noticeable joints at the edges.

The technique of plugging plaster with a sponge

In addition to rollers, a sponge is also used for decorative wall decoration, which allows you to achieve a spotted soft pattern. The sponge can be synthetic or marine. The image obtained by a synthetic sponge is much different from the pattern performed by a natural one, since the first sponge has an ordered pore structure. This makes the drawing correct. A natural sponge has larger pores arranged in a chaotic manner, which makes the pattern itself also disordered. To achieve a more unique image, some experts advise cutting such a sponge in half, applying the solution with its inside. When working, you need to touch the base with light blotting movements.

Technique for plugging decorative plaster with a cloth

Another unusual way to implement decorative plaster is plugging with a cloth. As a rule, non-fibrous, highly absorbent materials are used. In this case, the drawing can be applied in two ways: with a fabric tourniquet or flaps. The first way you can create a soft unique pattern, and the second is similar to surface treatment with a sponge. There is also some combination of a tampon and tissue in the form of special tampon rollers. Such a roller does not create any differences for surface treatment, but it is much more convenient and faster to work with it. Also on sale in specialized stores you can find design rollers that form complex and beautiful patterns.

To create an orange peel effect, you can use a sponge roller with a medium grit. To achieve the "country" effect, a honeycomb roller is used. If you want to leave marks with a brush, it is carried out over the applied plaster. In this case, the brush should be Spanish or a short pile.

The cost of applying decorative plaster with a roller

The price for applying textured plaster per square meter depends on the following factors:

• type of coating, for example, the most expensive of them are silicone and Venetian;
• from the volume of consumable material, which averages 1 kilogram per square meter, and in the case of fine plaster, the consumption will be less.

Materials for decorative plastering can be purchased at any hardware store. Prices for the material are very different and depend on the manufacturer and the composition of the product. The most expensive is decorative Venetian plaster. Its high cost is due to the complexity of working with the composition, strict requirements for the quality of the base, as well as the technique of applying the composition in several layers. If there is a desire, then such a composition can be made independently or ordered from experienced builders. This will significantly reduce the cost of coating per square meter.

The price variation of textured rollers for decorative plaster is also wide. The higher the quality of the material used in the manufacture of the roller, the tool costs more. A wooden or rubber plaster roller is more expensive than others, but it has the longest service life compared to foam or plastic counterparts.

Conclusion

Structural rollers are tools with a simple design, but with a wide range of possibilities. With it, mono imitate skin, fur, stone, wood, and even animal paw prints. To apply textured plaster, you just need to pick up a roller with the required texture and start mastering the application technique. When I give it, it is desirable to give preference to a high-quality tool, observing the appropriate wall finishing technology.

If you follow a few recommendations, this simple tool can become indispensable for creating the interior of your dreams. After all, decorative plaster has long passed from its main function of leveling walls into a means for decorating them. The textured roller for decorating with plaster consists of a cylinder, its cover and a handle. The cylinder itself has a base, which can be made of metal, rubber or plastic. The cover is also made from various materials, such as fabric, leather or foam rubber. The irregularities on their surface will be reflected in the wall covering with various shapes and images. The plaster is applied using a structural roller on pre-treated walls with movements from the bottom up. When working, it is important to remember that you can not put pressure on the roller in order to get a clear texture of the picture. After the surfaces have dried, in some cases, individual elements are covered with acrylic paint, for example, bulges or depressions are painted over with golden or silver paint in accordance with the tone prevailing in the interior of the room.

Decorative plaster is a finishing material that is extremely attractive not only in terms of its technical characteristics.

This coating has opened up great opportunities for both designers and ordinary people who want to give their homes a stylish personality.

With the help of a roller, it allows you to recreate many types of surfaces.

A textured roller will help imitate wood, a hewn stone slab, fur, leather, and even animal paw prints if animal motifs are traced in the interior. A simple-looking video is fraught with huge design opportunities. For you just need to pick up a roller with the desired texture and master the technique of use.

Rollers differ from other tools for giving texture to plaster in the first place. Applicators, stamps, sponges, decorative swabs are designed for spot work or decoration of small areas. Using a structural roller for decorative plaster, you can process large surfaces and increase productivity by several times.

All the numerous types of rollers can be divided according to two criteria: the type of material from which the working surface is made, and the pattern that they leave on the plaster.

Types of rollers according to the material of the working surface

Foam rubber

Foam rubber for such a roller should be with deep pores of various diameters, which, depending on the size, will leave marks on the plaster in the form of bursting bubbles or “lunar craters”.

It is not necessary to press hard on the roller, otherwise the plaster will lie in the usual even layer, without any relief.

You should also pay attention to the following points:

• Decorative plaster should be finely dispersed.

Embossed does not cope with the stretching of large particles, and the effect of the desired surface is smeared

• Do not work with plaster with solvents in the composition.

These substances easily dissolve foam rubber, fragments remain on the surface, creating an unaesthetic appearance.

Styrofoam

A cheaper analogue of a rubber roller. With it, you can also work with various types of plaster and recreate many patterns, but such a roller will not last long.

Styrofoam is a fragile material prone to deformation, so during the work such a roller will have to be changed more than once.

In addition, the patterns on the foam tend to flatten out, creating a pattern that is not as expected.

Alternatively, you can use a foam roller with a flat surface, but, unfortunately, it is not able to give the plaster an interesting texture.

Rubber

The most preferred tool. On a flat surface of the roller, there are protrusions or recesses that create a pattern.

Suitable for creating a clearly defined texture: brickwork, painting, patterns of various types.

In some cases, the plaster may stick to the surface of the roller. To avoid this, it is advised to wet the roller in a soap solution, but it is not known how such manipulations will affect the appearance of the final coating.

Leather

The leather surfaced roller is able to create one of the most commonly used effects - the marble surface. In view of its elasticity, the skin creates beautiful marble "streaks".

Most often, such a tool is used to work with Venetian plaster.

The choice of roller must be approached carefully: it is better to use genuine leather.

Artificial material can only deliver disappointment, since low-quality leather will, at best, slide over the plaster without leaving any marks, and at worst, it will dissolve and ruin expensive plaster.

Wooden

One of the simplest rollers that has all the advantages of rubber. However, such a tool additionally guarantees the environmental friendliness of the coating, because the tree will not enter into a spontaneous chemical reaction with the ingredients in the plaster. Therefore, wooden rollers are often used to decorate walls in children's rooms.

However, over time, the wood can absorb water in the plaster and swell. The picture becomes less clear. This is easily fixed: it is enough to dry the roller, and it will be ready for further work.

plastic

A plastic roller is positioned as a cheaper analogue of a rubber roller. Allows you to create many textures and patterns. On sale you can find plastic rollers with holes and holes for creating bulges on the wall. This version of the surface is not trivial.

The disadvantages of this material include the fact that over time the plastic is deformed, covered with cracks and chips, which does not have the best effect on the final result.

fleecy

Create the effect of a "fur" wall. The pile material is diverse - from natural fur to polyamide threads. The length of the pile varies from 2 to 25 mm. The longer the pile, the more “shaggy” the wall will turn out.

When buying, you should be careful and check the quality of the fastening of the pile to the moving cylinder.

A poor-quality roller will spoil the surface, dotting it with loose villi.

Types of rollers according to the final invoice

The texture of the rollers can be completely varied and imitate brick, marble, wood, textiles, fur and even more complex patterns (braids, oriental ornament, waves, etc.)

Each of them allows you to create a specific surface. The richer the final texture should be, the deeper the pattern is cut on the roller.

It is worth noting that for each room it is necessary to choose its own texture of the walls and, accordingly, its own type of roller.

Imitation brickwork will look good in the hallway or in the working area of ​​​​the kitchen, but is completely out of place in the bedroom. Therefore, a roller with interchangeable nozzles would be a very convenient option.

Do-it-yourself roller for decorative plaster

Despite more than a wide range of factory rollers on sale, many people prefer to make a tool with their own hands.

There may be several reasons for this: the desire to save money, which was already spent a lot on repairs, or the lack of a roller with the desired pattern on sale, or the desire to give the interior individuality with the exclusive texture of the walls.

Whatever the reason, there are several ways to make a structural roller yourself:

1. To imitate brickwork, a foam roller is taken as the basis. With an ordinary clerical knife, recesses are cut out in the shape of bricks on it. It is a mistake to cut the bricks themselves, because after smoothing the plaster they will not be convex, but pressed into the wall, which will deprive the imitation of realism.

1. In order to reproduce a textile canvas, there is nothing better than the textile itself. A regular foam roller should be wrapped with a rough-textured canvas tape and secured with threads.

1. To imitate a marble surface, a plastic roller sheathed with a piece of genuine leather is the best fit. It is better to sew carelessly, with folds.

1. To give the surface the effect of a natural board, it is necessary to wrap the plastic roller with a narrow piece of dense textile or sheathe it with a crinkled cloth.

1. To create a specific pattern, it can be cut on the surface of the auxiliary roller. Styrofoam or foam rubber is best suited for these purposes. It is worth considering that the foam rubber must be rigid.

In some cases, various massage rollers and kitchen utensils (rolling pins, etc.) were used as a textured roller.

Roller technique for decorative plaster

In order for the final texture to meet expectations, the roller should be worked in compliance with a certain technology:

• the movement should go from bottom to top, chaotic movements should not be allowed, otherwise the structure will be indicated indistinctly;

• for the same reason, the strips carried by the roller should be close to each other, but not overlapping;

• the first stripes must be drawn using the building level, otherwise there is a chance they will “fill up” relative to the floor and ceiling;

• work must be carried out taking into account the drying time of the plaster. Even slightly dried up, it becomes much less plastic. It is possible to apply decorative plaster with a roller in fragments, then work out the surface with a roller and only then proceed to the next section of the wall;

• The rollers are subject to wear. In the case of long-term work with a roller made of short-lived material, it must be replaced in time.

The structural roller is one of those tools that, in their simple design, store ample opportunities. To obtain the desired structure of decorative plaster, you only need to use a high-quality roller and follow the technology.