Interchangeable inserts for wood cutters. Replaceable carbide inserts. Benefits of indexable carbide inserts

Carbide plates are classified according to GOST 19042-80. Cutting products are used in the manufacture of the working surface of the tool. Carbide backing plates are used to hold the blades. They provide precise positioning of the cutting part. Purpose of chip-breaking plates - crushing of metalworking wastes. All carbide products have design and overall features. The plates additionally differ in the number and shape of the faces, the presence of holes, the size of the rear angle:

Unilateral (R, M) and bilateral (N, A, F, G);
Flat (N, A) and fluted (R, M, F, G);
With hole (A, M, G) and without hole (N, R, F);
With zero clearance (N) and clearance greater than 0.

Double-sided carbide inserts are more durable, but have less rigidity, strength and stability than single-sided carbide inserts. Products with clearance N are installed in the holder in such a way as to achieve the desired parameters. When choosing, pay attention to the configuration of the front face. The presence of a chipbreaker is an important factor for operation. Proper use of replaceable multi-faceted inserts for their intended purpose helps to increase the service life of metal-cutting tools.

Production of carbide inserts

For the manufacture of multifaceted nozzles, modern hard alloys with an improved formula are used. The geometric accuracy of execution is a mandatory characteristic that provides a significant reduction in the percentage of defective products in metalworking. Specific parameters of carbide inserts are regulated by standards. GOST 19086 defines the technical characteristics of chipbreakers, cutting and supporting nozzles. In the production of brazed products, the enterprises are guided by GOST 25395.

Benefits of indexable carbide inserts

An important point. Indexable carbide multi-faceted inserts are not designed for use with one-piece tools made in the form of solid products from the holder and working part.

Our catalog contains replaceable multifaceted inserts made of cermet, elbor and other hard alloys. All products retain their original properties when heated up to 1150 °C. Certain materials are used to treat different surfaces. A wide range of carbide products allows you to perform all types of work by changing multifaceted inserts. This solves the problem of holder reuse, reducing the cost of cutting tools and consumables while improving the quality of processing.

The appearance on the market of indexable multi-faceted inserts for turning tools and milling cutters has led to the elimination of regrinding. As a result, the production has the opportunity to reduce the staff of sharpeners, reduce the cost of special equipment and abrasives while saving usable space. There was no need to solder the cutting part, so the cost of tool manufacture and solder was reduced. Quick change significantly increases productivity and saves working time. The advantages of using carbide inserts are obvious:

The versatility of one cutter to perform different operations;
Economic benefit from changing inserts, not tools;
A wide choice of hard-alloy nozzles for various purposes;
Growth in speed and productivity in metalworking;
Increase convenience due to the possibility of changing modes.

The use of interchangeable multi-faceted plates is especially beneficial in small businesses and at home, where saving not only the budget, but also space is important. A set of carbide bits is significantly less expensive and takes up less space than a matching set of cutters or cutters while doing the same job. Multi-faceted indexable inserts are successfully used for surface machining, cutting sheet materials, threading, boring and reaming, grooving and grooving.

We bring to your attention replaceable carbide inserts for turning tools used for machining hard materials. Inserts are used for tooling cutters on machine tools. They are made on the basis of hard alloyed alloys, which ensures a long service life. The catalog contains a wide range of products for equipping cutters of various types.

What applications are carbide inserts used for?

Turning and milling are among the most modern methods of working with hard materials such as natural wood, MDF, chipboard, and metal blanks. Replaceable carbide plates are metal blanks with several edges, the installation of which allows you to perform work on figured cutting, milling and turning of blanks.

The insert configuration, the sharpening angle and the number of edges determine the profile of the manufactured parts. The depth of chip removal, cleanliness and quality of processing depend on these parameters. In particular, there are inserts for roughing, finishing, grinding workpieces. When choosing, you need to choose the right equipment to perform the necessary work. For example, standard square inserts are used for straight or miter cutting of material. Pentahedral carbide inserts are used for figured end machining and a number of other tasks.

Snap Benefits

Turning replaceable carbide inserts are made on the basis of high-strength alloys, each of which is optimal for processing a particular metal, wood or other material. In the description for each product, you can find a detailed table of materials for which a plate of a particular alloy is suitable for processing.

The advantages of using indexable inserts for milling, turning include the following features:

Interchangeable design simplifies the operation of cutters, reduces the level of wear of the main equipment;
Selection of the optimal sharpening angle and chipbreaker configuration for a faceted insert improves the quality of parts processing;
The affordable price of inserts and long service life reduces the cost of operating milling, turning equipment.

If you are interested in indexable carbide inserts for milling cutters, you will find a wide range of high quality products with us.

The principle of operation of the plates

Each plate has one or more mounting holes, depending on its size and configuration. With the help of bolted connections, the inserts are installed on the surface or edge of the cutter, forming a cutting coating of the desired shape and configuration. Thanks to the correct selection of sharpening angles, the number of edges and other parameters of the insert, it is possible to change the configuration of the cutting coating from a flat plane to a relief surface. As a result, after installing and tightening the fasteners, you can get a universal tool for working workpieces of any strength from various materials, from wood to metal.

Benefits of contacting us

If you are interested in replaceable carbide inserts, you can buy them in our company. We guarantee the high quality of each product, compliance with the nominal characteristics stated in the description.

Replaceable carbide insert, the price of which is indicated on the website, is offered without an intermediary extra charge, making the purchase profitable for the customer. When ordering, we offer delivery to the cities of Russia on conditions convenient for the client. Call to find out more and place an order.

In the RINCOM online store you can buy interchangeable inserts for milling cutters and cutters of various types. We offer attractive terms of cooperation. Let's list our advantages.

A large assortment. In the catalog you will find a huge number of interchangeable non-regrindable inserts designed to be installed on various types of tools and perform a wide range of operations.

Favorable prices. We purchase tools and equipment directly from manufacturers. Prices are kept to a minimum.

Attractive conditions for long-term cooperation. By becoming our regular customer, you will receive a serious discount on the entire range of metalworking tools.

Strict observance of the terms of the concluded contracts. We will deliver the goods you purchased on time. We guarantee the accuracy of order picking.

Wide geography of sales. We supply metal-cutting tools to Moscow, the Moscow region and other regions of the Russian Federation.

Top quality. Characteristics of products meet the requirements of GOSTs. We guarantee the absence of marriage.

Prices for indexable inserts for cutters and cutters

Prices for interchangeable inserts for cutters and cutters vary. Cost is affected by:

type of cutting elements;

their dimensions;

manufacturing materials;

manufacturer;

other factors.

You can purchase the following types of replaceable carbide inserts from us.

3-sided.

3-faced broken lines.

Rhombic.

Square.

Parallelogram plates.

5-sided.

6-sided.

Products are made of hard alloys VK8, T5K10, T15K6, VOK71, VOK60, HB7520, etc. Smooth models and inserts with chipbreakers are available for order.

The use of replaceable carbide inserts for cutters and cutters

Let's talk about the use of interchangeable inserts for cutters and cutters.

3-sided. They are equipped with boring, cutting and through cutters.

3-faced broken lines. They are fixed in automatic, boring and through cutters.

Rhombic. Suitable for:

boring, cutting and through cutters;

boring heads;

hole making tools.

Most often, boring cutters are equipped with rhombic plates. The main operations performed by these tools include: boring through, blind and stepped holes, trimming the ends of workpieces, cone turning, chamfering, machining holes with a diameter of more than 40 mm.

Square. They are equipped with end mills, as well as through and boring cutters.

Parallelogram plates. They are used for the same purposes as rhombic ones.

5-sided. Are intended for equipment of shell end mills.

6-sided. They are most often attached to end mills and through cutters.

Round. Scope of application - special cutters and end mills.

The method of attaching indexable turning inserts depends on whether they have holes or not. To fix the cutting carbide elements with holes, the lever method is used. Plates without holes are fixed using a different technology. Products are installed in nests and pressed against the supporting surfaces with a tack.

Choice of indexable inserts for cutters and cutters

When choosing indexable inserts for cutters and cutters, consider the type of tool, the types of operations performed, and the material of the cutting elements. Most often, cutters and cutters are equipped with plates made of the following alloys.

VK8. Inserts made of this alloy are most often used in roughing structural steels, difficult-to-machine materials and gray cast iron.

VK6. Such inserts are usually installed on cutters and cutters used for processing products made of non-metallic materials, gray cast iron and non-ferrous metals.

T15K6. The scope of application of plates from this alloy is the processing of workpieces from alloyed and carbon steels.

VK3M. Such inserts are most often installed on tools designed for turning, threading and reaming holes in products made of alloyed and hardened steels, as well as abrasive non-metallic materials.

VK3. These plates are usually used when working with sheet metal.

How to make an order

To buy replacement carbide inserts for cutters and milling cutters in our online store, add the appropriate items in the required quantities to your shopping cart and place your order. After clarifying all the details, we will immediately organize the delivery.

How to buy the tool "Replaceable plates"?

In order to order and buy the product of your choice, find it in the tool catalog, specify its quantity and click on the "Buy" button, then you need to go to the menu item " Your shopping cart» and fill out a short order form indicating your coordinates. After that, a letter will be sent to your e-mail (if it is specified correctly) stating that your application has been accepted.

Tool Delivery

The tool ordered in our company is delivered to almost any city in Russia with the help of transport companies. By default, all invoices are excluding shipping costs.

Return of good quality goods

We draw your attention to the fact that according to Art. 26.1 of the Law "On Protection of Consumer Rights" The buyer has the right to refuse the goods at any time without giving reasons before its transfer, and after the transfer of the goods - within 7 days.

Return of goods of good quality is possible provided that the specified goods were not in use, their presentation, consumer properties, as well as a document confirming the fact and conditions of purchase are preserved.

Exchange of good quality goods

According to Art. 25 "On Protection of Consumer Rights" The buyer has the right to exchange goods of good quality for a similar product from the seller from whom this product was purchased if the specified product did not fit in shape, size, style, color, size or configuration. The Buyer can exchange the goods for a suitable one within 14 days, not counting the day of purchase.

The exchange is made only if the trade dress and consumer properties of the goods are preserved, the sales receipt or other document confirming payment is available, and also if the specified goods were not in use. In the event that a similar product is not available for sale, the Buyer has the right to demand a refund of the funds paid by him for the specified product.

In case of rejection of the goods, the company refunds the money paid by the Buyer under the contract, with the exception of the cost of shipping the returned goods from the Buyer, within 14 days from the date the Buyer submits the relevant request. In addition, by agreement with the seller, the Buyer can exchange the goods when the analogue goes on sale.

Return of goods of inadequate quality

In case of detection of defects in the goods, the Buyer has the right:

Request a replacement for a product of the same brand (model);
Request a replacement for the same product of a different brand (model) with a corresponding recalculation of the purchase price;
Request a commensurate reduction in the purchase price;
Refuse to fulfill the contract of sale and demand the return of the amount paid for the goods.;

Return of goods of inadequate quality is carried out by the seller.

The above conditions for the return / exchange of goods do not apply to goods made according to the individual order of the Buyer.

The Rinkom company admits the presence of erroneous or inaccurate information about the product located on our website www.site. In order to avoid unpleasant situations, we kindly ask you to contact our managers for clarification of information about the product.”